# The Acetylene Safety (England and Wales and Scotland) Regulations 2014, Regulation 4: Prohibition concerning compressed acetylene gas


(1) Subject to paragraph (2), no person is to use, store, transport, import or sell compressed acetylene gas.
(2) Paragraph (1) does not apply to—
(a) the use of compressed acetylene gas at equal to or lower than 1.5 bar(g) provided that—
(i) the requirements in Schedule 1 are complied with; and
(ii) risk is reduced so far as is reasonably practicable;
(b) the storage of compressed acetylene gas in an acetylene manifold, provided that—
(i) the requirements in Schedule 1 are complied with; and
(ii) risk is reduced so far as is reasonably practicable;
(c) the storage of compressed acetylene gas in a cylinder which would, if used for carriage, meet the requirements of—
(i) the 2009 Regulations; and
(ii) paragraph 8 of Schedule 1 (cylinder colouring) to these Regulations;
(d) the transportation, importation and sale of compressed acetylene gas in a cylinder, provided that—
(i) the relevant requirements of the 2009 Regulations are complied with; and
(ii) the cylinder complies with paragraph 8 of Schedule 1 (cylinder colouring) to these Regulations;
(e) the use or storage of the requisite amount of compressed acetylene gas, in conditions other than those specified in sub-paragraphs (a) to (d), where the use or storage is required to assess the compliance of acetylene equipment, an acetylene manifold or cylinder with any relevant standards of a prescribed standards body or with relevant legal requirements, provided the use or storage is undertaken in such a way that risk is reduced so far as is reasonably practicable; and
(f) the use or storage of compressed acetylene gas in conditions other than those specified in sub-paragraphs (a) to (d), during the process of testing equipment, including devices and valves, where the testing occurs for the purpose of regulatory investigations, enforcement actions or other legal proceedings initiated by the licensing authority.
(3) In this regulation—
“prescribed standards body” means any full member from time to time of the International Organization for Standardization;
“requisite amount” means—
(a) where there is a minimum amount required for the assessment in the relevant standard or in the relevant legal requirements, that minimum amount; or
(b) where there is not a minimum amount required for the assessment in the relevant standard or the relevant legal requirements, the lowest amount at which the assessment can be performed effectively;
“relevant legal requirements” means any enactment of national, European or international origin imposing, from time to time, safety or technical requirements on acetylene equipment, an acetylene manifold or cylinder, that is applicable in Great Britain or in any other jurisdiction.

---
Source: https://www.legislation.gov.uk/uksi/2014/1639/regulation/4 (the official version)
Page: https://openlegislation.uk/acetylene-safety-england-and-wales-and-scotland-regulations-2014/regulation-4
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

