{
  "url": "https://openlegislation.uk/aerosol-dispensers-regulations-2009/regulation-3",
  "json_url": "https://openlegislation.uk/aerosol-dispensers-regulations-2009/regulation-3.json",
  "legislation": "uksi/2009/2824",
  "legislation_title": "The Aerosol Dispensers Regulations 2009",
  "legislation_url": "https://openlegislation.uk/aerosol-dispensers-regulations-2009",
  "path": "regulation/3",
  "kind": "regulation",
  "number": "3",
  "heading": "Requirements for the marking of aerosol dispensers",
  "text": "(1) Paragraphs (2) to (8) set out the requirements which must be complied with under regulation 5 in order to mark an aerosol dispenser or where paragraph (1A) applies, on a label affixed to, or a document accompanying, the aerosol dispenser with the UK marking.\n(1A) For a period of seven years beginning with IP completion day, the UK marking may be affixed to—\n(a) a label affixed to the aerosol dispenser; or\n(b) a document accompanying the aerosol dispenser.\n(2) The aerosol dispenser is a relevant aerosol dispenser.\n(3) The person responsible for the marketing of the aerosol dispenser has complied with the obligations set out after the heading to point 2 (general provisions) and immediately before point 2.1 of Schedule 1A.\n(4) The aerosol dispenser complies with the general provisions relating to construction set out in point 2.1 of Schedule 1A.\n(5) The aerosol dispenser complies with the provision relating to the volume of the liquid phase set out in point 2.3 of Schedule 1A.\n(6) The aerosol dispenser complies with the special provisions set out in points 3, 4 and 5 of Schedule 1A in the case of metal, glass and plastic dispensers respectively.\n(7) The aerosol dispenser—\n(a) meets the test specified in point 6.1.1 of Schedule 1A in the case of empty containers;\n(b) meets the tests specified in point 6.1.2 and 6.1.3 of Schedule 1A in the case of empty metal and protected glass dispensers respectively; and\n(c) satisfies one of the following subparagraphs—\n(i) it meets the test method specified in point 6.1.4.1(a) of Schedule 1A and the dispenser is not of a type referred to in point 6.1.4.2 of that Schedule;\n(ii) it meets the test method specified in point 6.1.4.1(b) of Schedule 1A and the dispenser is not of a type referred to in point 6.1.4.2 of that Schedule;\n(iii) it meets the test method specified in point 6.1.4.1(c) of Schedule 1A.\n(8) Unless paragraph (9) applies, the aerosol dispenser is marked in characters which are visible, legible, indelible and (unless it is unlikely that the dispenser will be used in the United Kingdom) in the English language, with—\n(a) the following information—\n(i) the name and address or trade mark of the person responsible for marketing the aerosol dispenser;\n(ii) code markings enabling the filling batch to be identified;\n(iii) the details referred to in point 2.2 of Schedule 1A; and\n(iv) where an aerosol dispenser—\n(aa) contains flammable components as defined in point 1.8 of Schedule 1A; and\n(bb) is not classified as extremely flammable or flammable in accordance with the classifications set out in point 1.9 of Schedule 1A;\nthe quantity of flammable material contained in the aerosol dispenser must be clearly stated on the label in legible and indelible wording in the following form—“X % by mass of the contents are flammable”;\n(b) the net contents by volume expressed in metric units; and\n(c) if the person responsible for marketing the dispenser sees fit, the net contents by weight expressed in metric units.\n(9) This paragraph applies where—\n(a) the capacity of the dispenser does not exceed 150ml;\n(b) the dispenser is too small to be marked with the information referred to in paragraph (8); and\n(c) that information is marked on a label attached to the dispenser.",
  "extent": "E+W+S",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Words in reg. 3(1) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 13 para. 3(a)(i) (with reg. 2) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 8(2)(a)); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Words in reg. 3(1) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 13 para. 3(a)(ii) (with reg. 2) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 8(2)(a)); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F3",
      "text": "Reg. 3(1A) inserted (E.W.S.) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 13 para. 3(aa) (with reg. 2) (as amended by S.I. 2020/676, regs. 1(1), 2 and S.I. 2020/1460, reg. 1(4), Sch. 3 para. 8(2)(b)); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F4",
      "text": "Words in reg. 3(1A) substituted (E.W.S.) (31.12.2022) by The Product Safety and Metrology (Amendment and Transitional Provisions) Regulations 2022 (S.I. 2022/1393), regs. 1(1), 3, Sch. 2 para. (d)"
    },
    {
      "type": "F",
      "label": "F5",
      "text": "Words in reg. 3 substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 13 para. 3(b) (with reg. 2) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F6",
      "text": "Words in reg. 3(5) substituted (19.6.2014) by The Aerosol Dispensers (Amendment) Regulations 2014 (S.I. 2014/1130), regs. 1, 3(2) (with reg. 4)"
    },
    {
      "type": "F",
      "label": "F7",
      "text": "Words in reg. 3(7)(b) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 13 para. 3(c) (with reg. 2) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F8",
      "text": "Words in reg. 3(7)(c) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 13 para. 3(d)(i) (with reg. 2) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F9",
      "text": "Words in reg. 3(7)(c) inserted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 13 para. 3(d)(ii) (with reg. 2) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "F",
      "label": "F10",
      "text": "Reg. 3(8)(a) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 13 para. 3(e) (with reg. 2) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)"
    },
    {
      "type": "E",
      "label": "E1",
      "text": "This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/2009/2824/regulation/3",
    "retrieved_at": "2026-10-29T03:03:51.158826+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}