OpenLegislation

Part II Manner in which safety cabs are to be marked

Original text. Later amendments are not shown.

Safety cabs shall be marked in the following manner:—

  1. (a)

    Every mark required by these regulations shall be on the main structure of the safety cab.

  2. (b)

    Every such mark shall be clear, legible and permanent, and in a prominent and easily accessible position.

  3. (c)

    The name of the make or model of a tractor may be represented by a recognisable abbreviation of that name.

  4. (d)

    Where a model of tractor is referred to, it shall be described in such a way as not to include any tractor for use with which the safety cab is not approved.

  5. (e)

    Supplementary marks relating to the same approval mark shall be as near as is reasonably practicable to the approval mark and to each other.

  6. (f)

    Where there is more than one approval mark on a safety cab the supplementary marks relating to each shall be separate and clearly distinguishable from those relating to the other.