Paragraph 3
In this Part—
all values must be expressed in μg/m3;
the volume must be standardised at the following conditions of temperature and pressure: 293K and 101.3kPa;
the time must be specified in Central European Time;
“AOT40” (expressed in (μg/m3) hours) means the sum of the difference between hourly concentrations greater than 80 μg/m3 (which equals 40 parts per billion) and 80 μg/m3 over a given period using only the 1 hour values measured between 8:00 and 20:00 Central European Time each day; and
in order to be valid, the annual data on exceedances used to check compliance with the target values and long-term objectives below must meet the criteria set out in Part 2 of Schedule 12.
Notes on Part 4
Footnotes
- f1
(1)
Compliance with target values will be assessed as of this value; that is, 2010 will be the first year the data for which is used in calculating compliance over three or five years, as appropriate.
- f2
(2)
The maximum daily 8-hour mean concentration will be selected by examining 8-hour running averages, calculated from hourly data and updated each hour. Each 8-hour average so calculated will be assigned to the day on which it ends; that is, the first calculation period for any one day will be the period from 17:00 on the previous day to 01:00 on that day; the last calculation period for any one day will be the period from 16:00 to 24:00 on the day.
- f3
(3)
If the three or five-year averages cannot be determined on the basis of a full and consecutive set of annual data, the minimum annual data required for checking compliance with the target values will be as follows: (i) for the target value for the protection of human health, valid data for one year, and (ii) for the target value for the protection of vegetation, valid data for three years.