# The Alternative Fuel Labelling and Greenhouse Gas Emissions (Miscellaneous Amendments) Regulations 2019, Schedule 2: Additional labelling requirements for dispensers for petrol-type or diesel-type fuel


A label affixed to a dispenser for petrol-type or diesel-type fuel must be in this form—
where—
(a) section A contains the product name, which must be a minimum of 10 mm in height,
(b) section B contains the relevant identifier, to the scale set out in Part 1 or Part 2 of Schedule 1,
(c) section C, in the case of petrol-type fuel, contains the grade designation or octane rating, which must be a minimum of 5 mm in height, and
(d) section D, in the case of a fuel falling within regulation 3 of the Biofuel (Labelling) Regulations 2004, contains the consumer message required by that provision, and which must be a minimum of 5 mm in height.

---
Source: https://www.legislation.gov.uk/uksi/2019/421/schedule/2 (the official version)
Page: https://openlegislation.uk/alternative-fuel-labelling-and-greenhouse-gas-emissions-miscellaneous-amendments-regulations-2019/schedule-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.