# The Asbestos Products (Safety) Regulations 1985, Paragraph 2


The dimensions in millimetres of the label shall be those shown on the diagram, except that larger measurements may be used, but in that case the dimension of the label indicated as h on the diagram in paragraph 1(1) above shall be 40% of the dimension indicated as H on that diagram.

---
Source: https://www.legislation.gov.uk/uksi/1985/2042/schedule/paragraph/2 (the official version)
Page: https://openlegislation.uk/asbestos-products-safety-regulations-1985/schedule/paragraph-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.