# The Calibration of Tanks of Vessels (EEC Requirements) Regulations 1975, Regulation 4


(1) The Secretary of State shall cause to be carried out a calibration of the tank, in respect of which the application has been made, in accordance with the provisions of the Directive and, subject to the provisions of paragraph (2) of this regulation, shall—
(a) issue a calibration certificate;
(b) cause to be affixed on the calibrated tank, in the vicinity of the measure orifice, a calibration plate of durable material bearing the information and the lead plugs required by the Directive.
(2) A calibration certificate shall not be issued, except where the Secretary of State is satisfied that there are reasonable grounds for making an exception, unless the construction and arrangement of the tank and connecting pipes are such that under normal operating conditions of the vessel, the tank and connecting pipes can, without difficulty, be totally emptied or totally filled without pockets of air becoming trapped above or in the liquid being measured, below the level at which the tank is considered full.
(3) The calibration certificate shall be in such form, contain such particulars, and have annexed thereto such documents in such form as is required by the Directive.

---
Source: https://www.legislation.gov.uk/uksi/1975/2125/regulation/4 (the official version)
Page: https://openlegislation.uk/calibration-of-tanks-of-vessels-eec-requirements-regulations-1975/regulation-4
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

