Regulation 9 Reassessment of conformity
Regulation 21 is amended as follows.
In paragraph (1), for “(b)” substitute “ (c) ”.
In paragraph (3)(a)—
after “reassessed by a”, insert “ type A ”; and
for “Part II of Annex IV” substitute “ Annex III ”.
For paragraph (3)(b), substitute—
“(b)inspected by a notified body notified for periodic inspection of that equipment and marked in accordance with the requirements of articles 14 and 15 of that Directive.”.
For paragraph (4), substitute—
“(4)But if a pressure receptacle has been manufactured in series to a design type for which a type A notified body notified for reassessment of conformity has issued a certificate of type reassessment, the reassessment of conformity may be undertaken by a notified body notified for periodic inspection of that pressure receptacle.”.
After paragraph (4), insert—
“(5)In this regulation—
(a)“certificate of type reassessment” means a certificate issued in accordance with paragraph 7 of Annex III to the Transportable Pressure Equipment Directive; and
(b)“type A notified body” means a notified body conforming to standard EN ISO/IEC 17020 type A M1 as revised or reissued from time to time.”.
Annotations
Marginal citations
- M1
Current Edition: 2004, ISBN 0580446832.