OpenLegislation

Explanatory note

Original text. Later amendments are not shown.

(This note is not part of the Regulations)

These Regulations amend the Carriage of Dangerous Goods and Use of Transportable Pressure Equipment Regulations (Northern Ireland) 2010 (“the 2010 Regulations”) in order to implement Directive 2010/35/EU of the European Parliament and the Council of 16 June 2010 on transportable pressure equipment and repealing Council Directives 76/767/EEC, 84/525/EEC, 84/526/EEC, 84/527/EEC and 1999/36/EC (OJ L165, 30.6.2010, p.1) (“the 2010 Directive”).

These Regulations also include provision relating to ADR, RID and ADN. These are terms defined in the Table in regulation 2(5) of the 2010 Regulations and refer to the technical requirements (as revised or reissued) annexed to the international agreements governing the transport of dangerous goods by, respectively, road, rail and inland waterway.

Regulation 3 amends the Table in regulation 2 of the 2010 Regulations by inserting new defined terms and updating the meaning of the Transportable Pressure Equipment Directive so it refers to the 2010 Directive.

Regulation 4 amends regulation 3 of the 2010 Regulations in respect of the interpretation of ADR, RID and ADN for the purposes of those Regulations. A number of redundant provisions are removed and “EU” is substituted for “Communities” to reflect European institutional reform.

Regulation 5 replaces regulation 15 (conformity assessment) in the 2010 Regulations with regulations 15 to 15F. Regulation 15 sets out the equipment to which the general and specific obligations apply. Regulation 15A sets out the general obligations that apply where transportable pressure equipment is placed or made available on the market, put into service or used. Regulations 15B to 15F set out specific obligations on manufacturers, importers, distributors, owners and operators respectively.

Regulation 6 replaces regulation 16 (conformity assessment – national carriage), which is no longer allowed under the 2010 Directive, with a new regulation allowing a manufacturer to appoint an authorised representative to carry out some of its obligations and setting out the responsibilities of that authorised representative.

Regulations 7 and 8 amend regulations 17 and 18 of the 2010 Regulations to reflect the changes made by the 2010 Directive to the procedures for reassessment of conformity, and for periodic inspection and repeated use.

Regulation 9 amends regulation 25 of the 2010 Regulations to update the procedure for appointing a person to carry out the functions of a notified body.

Regulation 10 amends Schedule 2 (Radiological Emergencies) to make the carrier jointly responsible with the consignor for ensuring an emergency plan is in place and for reviewing and revising that plan when necessary.

A transposition note and impact assessment in relation to the implementation of the Directive have been prepared. Copies can be obtained from the Health and Safety Executive for Northern Ireland, 83 Ladas Drive, Belfast, BT6 9FR and are annexed to the Explanatory Memorandum which is available alongside this rule on the website, www.legislation.gov.uk.

A copy of Directive 2010/35/EU may be downloaded without charge from EURLEX, the European Law website (http://eur-lex.europa.eu/en/index.htm). ADR, RID, ADN and the United Nations Recommendations on the Transport of Dangerous Goods (the current edition of each is 2011) are available for purchase. The print versions of the 2011 editions have the following ISBN references; ADR - 9789211391404; RID - 9788086206400; ADN - 9789211391381; the United Nations Recommendations - 9789211391411. The current editions of ADR and ADN may also be downloaded without charge from the dangerous goods section of the United Nations Economic Commission for Europe website (http://live.unece.org/trans/danger/danger.html).