# The Carriage of Dangerous Goods (Classification, Packaging and Labelling) and Use of Transportable Pressure Receptacles Regulations 1996, Paragraph 7


(1) Subject to sub-paragraph (2) below—
(a) every employer shall ensure that no person employed by him modifies at work the body of a transportable pressure receptacle—
(i) of seamless construction, or
(ii) which has contained acetylene;
(b) every employer shall ensure that no person employed by him modifies at work the body of any other type of transportable pressure receptacle if that modification would put the transportable pressure receptacle outside the scope of the design standard or design specification to which it was originally constructed; and
(c) no person shall supply any modified transportable pressure receptacle for use unless following such modification a person approved under paragraph 3(4)(a) has marked or certified the receptacle as being fit for use or, in the case of an EEC-type cylinder, an inspection body referred to in regulation 13(b)(i) has so marked or certified it.
(2) Sub-paragraph (1) shall not apply any modification constituting the remaking of a thread if such modificati9on is carried out to accordance with a standard approved by the Executive.

---
Source: https://www.legislation.gov.uk/uksi/1996/2092/schedule/8/paragraph/7 (the official version)
Page: https://openlegislation.uk/carriage-of-dangerous-goods-classification-packaging-and-labelling-and-use-of-transportable-pressure-receptacles-regulations-1996/schedule-8/paragraph-7
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

