# The Classification and Labelling of Explosives Regulations 1983, Paragraph 1


One of the labels required by Regulation 6(1) shall—
(a) be a square set with its sides at an angle of 45° to the vertical;
(b) be in the form of the following diagram (the hazard classification code “1.2 E” is only an example); and
(c) comply with the measurements in the diagram except that—
(i) larger measurements may be used in which case the measurements shall be increased proportionally, or
(ii) where, in order to comply with Regulation 10(1), a smaller label is necessary, the dimensions may be decreased proportionally whilst remaining as large as is reasonably practicable for the purpose of such compliance.

---
Source: https://www.legislation.gov.uk/uksi/1983/1140/schedule/3/paragraph/1 (the official version)
Page: https://openlegislation.uk/classification-and-labelling-of-explosives-regulations-1983/schedule-3/paragraph-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.