{
  "url": "https://openlegislation.uk/clean-air-emission-of-grit-and-dust-from-furnaces-regulations-1971/regulation-4",
  "json_url": "https://openlegislation.uk/clean-air-emission-of-grit-and-dust-from-furnaces-regulations-1971/regulation-4.json",
  "legislation": "uksi/1971/162",
  "legislation_title": "The Clean Air (Emission of Grit and Dust from Furnaces) Regulations 1971",
  "legislation_url": "https://openlegislation.uk/clean-air-emission-of-grit-and-dust-from-furnaces-regulations-1971",
  "path": "regulation/4",
  "kind": "regulation",
  "number": "4",
  "heading": "Limits on emission of grit and dust from certain furnaces",
  "text": "(1) The quantities of grit and dust which may be emitted during any period from the chimney of a schedule 1 furnace or a schedule 2 furnace with a heat output or input which is within the highest and lowest values specified in column (1) of the relevant schedule shall not exceed the quantities prescribed by that schedule.\n(2) For the purposes of this regulation, where a chimney serves more than one furnace—\n(a) if it is a multiflue chimney, each flue shall be taken as a separate chimney serving a separate furnace; and\n(b) in any other case, it shall be taken as a single chimney serving a single furnace with a heat output or input equivalent to the aggregate of the heat outputs or inputs of the furnaces concerned;\nand for these purposes any part of the emission which derives from a furnace to which these regulations do not apply shall be disregarded.\n(3) The provisions of the next following paragraph shall have effect for applying the foregoing provisions to cases where the rating of a schedule 1 furnace or the heat input of a schedule 2 furnace is a value intermediate between two adjacent values in column (1) of the table in that schedule.\n(4) In a case described in the preceding paragraph, the prescribed quantities in respect of the chimney of the furnace shall be arrived at as follows:—\n(a) by interpolating the intermediate value into column (1) of the table between the two adjacent values (in this paragraph called “the two values”);\n(b) by calculating the interval between the lower of the two values and the intermediate value as a proportion of the interval between the two values, carried to two places of decimals; and then\n(c) by interpolating a figure, likewise carried to two places of decimals, into column (2) or (3), as the case may be, against the intermediate value at the same proportionate interval between the quantities prescribed in that column against the two values.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/1971/162/regulation/4",
    "retrieved_at": "2026-10-29T22:49:48.852497+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}