# The Customs Duties (Spain and Portugal) Order 1987, Schedule 5: PARTIAL EXEMPTIONS FROM CUSTOMS DUTY SPAIN


Combined Nomenclature Code:
Description of goods
Rates of duty
(1)
(2)
(3)
ex 0303.10.00 and ex 0303.22.00
Salmon, frozen and headless, for the processing industry for manufacture into pastes or spreads
0.6
ex 0302.65.10 and ex 0303.75.10
Piked dog-fish (Squalus acanthias), fresh, chilled or frozen, whole, headless or in pieces
3.7
ex 0305.30.90
Saithe (Pollachius virens), salted or in brine, whole, headless or in pieces, intended for smoking or drying
5.6
ex 0305.30.90
Fillets of saithe (Pollachius virens or Gadus virens), salted, or in brine, intended for smoking or drying
6.2
ex 0305.13.90
Shrimps of the species “Royal Red” (Haliporoides sibogae or Hymenopenaeus sibogae) peeled and deep-frozen, intended for the processing industry for the manufacture of products falling within heading no. 16.05 and sub heading 1902.20.10
5.6
ex 0306.19.90
Krill for processing
3.7
ex 0904.20.10 and ex 0712.90.90
Sweet red or green peppers, dried, dehydrated or evaporated, in pieces, with a moisture content not exceeding 9.5% but not further prepared
6.2
ex 1507.90.10
Purified soya-bean oil in glass bottles. Each bottle holds 10 litres of purified soya-bean oil containing by weight:
a minimum of 8.5% and a maximum of 12% of palmitic acid esters
a minimum of 2.5% and a maximum of 4.7% of stearic acid esters
a minimum of 22.4% and a maximum of 29% of oleic acid esters
a minimum of 46.6% and a maximum of 53.7% of linoleic acid esters
a minimum of 7.4% and a maximum of 11% of linolenic acid esters
and containing
not more than 5 millimoles of free fatty acid per kg of oil
phosphalipids corresponding to a nitrogen content not exceeding 0.04 mg per gram of oil
The soya-bean oil covered by this description is intended for the preparation of emulsions for injections
8 with a maximum of 125 ECU per 100 kg
ex 1604.11.00
Salmon for the processing industry for manufacture into pastes or spreads
1.7
ex 1605.30.00
Lobster flesh, cooked, to be used by the processing industry for the manufacture of butters based on lobster, pastes, pâtés, soups or sauces
3.1
ex 1605.20.00
Shrimps and prawns of the species “Pandalus borealis”, boiled in water and shelled, whether or not frozen or dried, intended for the industrial processing of products falling within heading No 1605
5.4
ex 2813.30.00
Aluminium hydroxide oxide in the form of pseudoboehmite
1
ex 2903.30.30
1.2-Dibromoethane
1
ex 2910.90.00
1.2-Epoxybutane
1.7
ex 2914.70.90
2-Chloro-4'-isobutylpropiophenone
1.2
ex 2915.90.00
2.2-Dichloropropionic acid
1.5
ex 2919.00.90
2.2-Bis(chloromethyl)trimethylene tetrakis(2-chloroethyl) bis(phosphate)
1.2
ex 2926.90.90
Isophthalonitrile
1.5
ex 2929.10.00
Methyl isocyanate
2.2
ex 2930.90.90
Thiofanox (ISO)
0.7
ex 2931.00.00
2-Chloroethylphosphonic acid
1.8
ex 2933.90.90
Alprazolam (INN)
1.1
ex 2934.90.90
Zotepine (INN)
1
ex 2933.39.90
(RS)-1-[2-(4-Chlorobenzhydryloxy)ethyl]piperidine and its salts
1
ex 2933.39.90
3.6-Dichloropyridine-2-carboxylic acid
0.7
ex 2933.39.90
2-Hydroxyethylammonium-3.6-di-chloropyridine-2-carboxylate
0.7
ex 3004.20.10
Purified collagen dispersed in a phosphate physiological saline solution whether or not containing lidocaine (INN)
1.2
ex 3301.29.53
Tanning extracts of eucalyptus
0.7
ex 3823.90.99
Tetrakis(2-chloroethyl) ethylene bis(phosphate)
1.2
ex 3823.90.99
Grains, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight not less than 70% and not more than 78% dialuminium trioxide and not less than 19% and not more than 26% zirconium dioxide
1.3
ex 3823.90.99
Grains, consisting of a mixture of dialuminium trioxide and zirconium dioxide, containing by weight not less than 54% and not more than 62% dialuminium trioxide and not less than 36% and not more than 44% zirconium dioxide
1.3
ex 3909.40.00
Thermosetting resin arising from the alkali-catalyzed polycondensation of phenol and formaldehyde, in one of the forms mentioned in note 6 (b) to Chapter 39
1
ex 3920.62.00 and ex 3921.90.19
Polyester film, dyed in the mass of a thickness of not more than 15 micrometres and metallized on one side
1.5
ex 3907.20.90
Polyethylene oxide having a molecular weight of not less than 4,000,000
2
ex 3920.91.00
Poly(vinyl butyral) film having a graduated coloured band
2
ex 3901.90.00
Terpolymer of ethylene, methyl actylate and a monomer containing a non-terminal carboxy group as a substitutent, whether or not compounded with silica
2
ex 3905.90.00
Copolymers of vinyl alcohol with ethylene, in one of the forms mentioned in note 6 (b) to Chapter 39
1.2
ex 3912.39.90
Ethylhydroxy-ethylcellulose, insoluble in water
1
ex 5402.51.90
Yarn of poly(p-phenylene terephthalamide) for uses other than for the manufacture of tyres or of products used in the manufacture of tyres
0.5
ex 5306.10.11 and ex 5306.10.31
Unbleached linen yarn (excluding yarn of flax tow), measuring per kilogram 30,000 m or less, for the manufacture of multiple or cabled yarns of the footwear industry or for whipping cable (a)
0.4
ex 5503.10.19
Textile fibres containing not less than 85% by weight of fibres of aromatic polyamides obtained by the polycondensation ofm-phenylenediamine and isophthalic acid and not less than 1% and not more than 15% by weight of fibres of poly (p-phenylene terephthalamide)
1.2
ex 5503.10.11 and ex 5601.30.00
Fibres of poly(p-phenylene terephthalamide)
0.5
ex 7019.10.59
Yarns obtained from continuous spun glass filaments having a diameter of not less than 12.5 micrometres and not more than 13.5 micrometres treated with resorcinolformaldehyde, of not less than 340 tex and not more than 680 tex
1.7
ex 8542.11.71
Dynamic, random-access memories of N-MOS technology (N-MOS D-RAMs) with a storage capacity of 256 K bits, in the form of a monolithic integrated circuit contained in a housing whose exterior dimensions do not exceed 17×34 mm, with not more than 20 connecting pins or contact areas and bearing:
an identification marking either consisting of or including one of the following combinations of figures and letters:
41245
TMM 4256 AP
PD41256 D
TMM 4256 P
TMM 41257
MCM 4256 S
TMS 4256
TMS 4257
MCM 4267S
HMSO 257
MCM 6256
MCM 6257
81256
81257
82256
or
other identification markings relating to N-MOS D-RAMs complying with the above mentioned description
1.2
ex 8542.11.71
Static, random-access memories (S-RAMs), with a storage capacity of 16K×1bit, a maximum access time of 35 ns and a standby power of not more than 150 milliwatts, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 16×33 mm, with not more than 20 connecting pins and bearing:
an identification marking either consisting of or including the following combination of figures and letters:
HM 6267 HP-35
MCM 2016-35
MB 81C 67-35
or
other identification markings relating to S-RAMs complying with the abovementioned description
2.1
ex 8542.11.71
Static, random-access memories of N-MOS technology (N-MOS, S-RAMs) with a storage capacity of 2 K×8 bits and a maximum access time of 45 ns, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 16×33 mm, with not more than 24 connecting pins and bearing:
an identification marking either consisting of or including one of the following combinations of figures and letters:
TMM 2018 H-35
TMM 2018 H-45
65161
65162
or
other identification markings relating to N-MOS S-RAMs complying with the above-mentioned description
2.1
ex 8542.11.71
Programmable, non-erasable, read-only memories (PROMs) of Schottky TTL technology, with a storage capacity of 2 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connecting pins or contact areas, and bearing:
an identification marking either consisting of one of the following combinations of figures or figures and letters or including one of those combinations:
27 S 12
5305
6305
27 S 13
5306
6306
5308
6308
28 L 22
5309
6309
28 LA 22
53 S 240
63 S 240
28 L2 XMFC
53 S 241
63 S 241
6335
29613
54 S 570
6336
29770
54 S 571
29771
7053
5604
7058
76 LS 03
7620
7621
82 S 114
82 S 130
82 S 131
93436
93446
38510
5624
74 S 570
74 S 571
MB 7115
MB 7116
MB 7117
MB 7118
or
other identification markings relating to PROMs complying with the abovementioned description
2.8
ex 8542.11.71
UV-erasable, programmable, read-only memories (EPROMs) with storage capacity of 16 K×8 bits, in the form of a monolithic integrated circuit, contained in a housing whose exterior dimensions do not exceed 17×39 mm, with a quartz window on the upper surface and bearing:
an identification marking either consisting of or including the following combination of figures:
27128
or
other identification markings relating to EPROMs complying with the abovementioned description
2.1
ex 8542.11.71
Static, random-access memories of N-MOS (including H-MOS) technology (N-MOS-S-RAMs) with a storage capacity of 1 K×4 bits and access time not exceeding 70 ns, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 8×23 mm, with not more than 18 connecting pins and bearing:
an identification marking either consisting of or including one of the following combinations of figures and letters:
AM 2149
PD 2149
SY 2149 H
TMS 2149
or
other identification markings relating to N-MOS S-RAMs complying with the abovementioned description
2.1
ex 8542.11.91
Field programmable array logics (PALs) of bipolar technology, in the form of a monolithic integrated circuit, with fusible links, a programmable AND array, fixed OR array, not more than 20 inputs and not more than 10 outputs, whether or not with registers, contained in a housing the exterior dimensions of which do not exceed 19×39 mm, with not more than 28 connecting pins and bearing:
an identification marking either consisting of or including the following combinations of figures and letters:
10 H 8
16 A 4
18 L 4
10 L 8
16 C 1
16 H 2
20 C 1
12 H 6
16 L 2
20 L 2
12 L 6
16 L 6
20 L 10
20 R 4
12 L 10
16 L 8
20 X 4
16 R 4
20 X 8
14 H 4
16 R 6
20 X 10
14 L 4
16 R 8
14 L 8
16 X 4
or
other identification markings relating to PALs complying with the abovementioned description
1.2
ex 8542.11.91
Programmable, non-erasable, logic circuits (field programmable logic array) of TTL Schottky technology, with not more than 48 AND functions, not more than eight OR functions, and not more than 16 inputs, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
an identification marking either consisting of or including one of the following combinations of figures or figures and letters:
FP 54 AS 839
FP 74 AS 839
FP 54 AS 840
FP 74 AS 840
SN 54 LS 333
SN 74 LS 333
SN 54 LS 334
SN 74 LS 334
SN 54 LS 335
SN 74 LS 335
SN 54 LS 336
SN 74 LS 336
82 S 100
82 S 101
93458
93459
or
other identification markings relating to programmable field logic arrays complying with the above-mentioned description
1.2
ex 8542.11.91
N-MOS (including H-MOS) programmable communication interfaces (N-MOS PCIs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 28 connecting pins and bearing:
an identification marking either consisting of or including the following combination of figures and letter:
8251 A
or
other identification markings relating to N-MOS PCIs complying with the abovementioned description
2.1
ex 8542.11.99
N-MOS (including H-MOS) programmable interval timers (N-MOS PITs), in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 24 connecting pins and bearing:
an identification marking either consisting of or including one of the following combination of figures:
8253
8254
or
other identification markings relating to N-MOS PITs complying with the abovementioned description
1.5
ex 8542.11.99
Universal Synchronous/Asynchronous Receiver/Transmitter (USART) of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 17×39 mm, with not more than 32 connecting pins and bearing:
an identification marking either consisting of or including the following combination of figures and letters:
MSM 82 C 51
or
other identification markings relating to Universal Synchronous/Asynchronous Receiver/Transmitters complying with the above-mentioned description
2.1
ex 8542.11.75
8 bit microprocessor of N-MOS (including H-MOS) technology with 16 bit internal architecture, in the form of a monolithic integrated circuit consisting of a central processing unit (CPU), a timing generator, two independent DMA channels, a programmable interrupt controller, three programmable 16 bit timers, programmable memory and peripheral chip select, a programmable wait state generator and a local bus controller, contained in a housing the dimensions of which do not exceed 30×30 mm with not more than 68 contact areas, and bearing:
an identification marking consisting of or including the following combination of figures:
80188
or
other identification markings relating to microprocessors complying with the above-mentioned description
2.1
ex 8542.11.99
Subscriber line audio-processing circuit (SLAC) with two digital signal processors, an analogue-digital converter and a digital-analogue converter, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×39 mm with not more than 28 connecting pins and bearing:
an identification marking either consisting of or including one of the following combinations of figures and letters:
AM 7901
AM 7905
or
other identification markings relating to SLACs complying with the abovementioned description
2.1
ex 8542.11.91
Monolithic integrated circuit in the form of pulse code modulation (PCM) of N-MOS (including H-MOS) technology, with encoding decoding and filter functions and a maximum data clock frequency of more than 3.5 MHz, contained in a housing the exterior dimensions of which do not exceed 8×26 mm, with not more than 20 connecting pins and bearing:
an identification marking either consisting of or including the following combination of figures:
2913
or
other identification markings relating to integrated circuits complying with the above-mentioned description
2.1
ex 8542.11.75
Single-chip microcomputers in C-MOS technology, in the form of a monolithic integrated circuit consisting of an ALU with a storage capacity of 8 bits with a ROM with a storage capacity of 128 K bits and a RAM with a storage capacity of 2 K bits, contained in a housing the exterior dimensions of which are not less than 20×26 mm, with a minimum of 80 connecting pins and bearing:
an identification marking either consisting of or including the following combinations of figures and letters:
HD 6301 Y
or
other identification markings relating to single-chip micro-computers complying with the abovementioned description
3
ex 8542.11.71
Dynamic, random-access read/write memory of N-MOS (including H-MOS) technology, (N-MOS D-RAMs) with a storage capacity of 64 K×4 K bits, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 17×34 mm, with not more than 20 connecting pins or contact areas arranged in 2 parallel lines (dual-in-line package) and bearing:
an identification marking consisting of or including one of the following combination of figures and letters:
TMS4464
PD41254
MSM4464
HM50464
PD41464
TMM41464
MB81464
or
other identification markings relating to N-MOS D-RAMS complying with the abovementioned description
2.5
ex 8542.11.75
16 bit microprocessor in N-MOS (including H-MOS) technology, in the form of a monolithic integrated circuit, consisting of a central processing unit (CPU), a timing generator, two independent DMA channels, a programmable interrupt controller, three programmable 16 bit timers, programmable memory and external chip selection logic, a programmable wait state generator with bus control unit, contained in a housing the exterior dimensions of which do not exceed 30×30 mm, with not more than 68 connecting pins and bearing:
an identification marking consisting of or including the following combination of figures:
80186
or
other identification markings relations to microprocessors complying with the above description
2.1
ex 8542.11.91
Circuit for the control of floppy discs (floppy disc controller) of C-MOS technology, in the form of a monolithic integrated circuit contained in a housing the exterior dimensions of which do not exceed 16×62 mm, with not more than 48 connecting pins and bearing:
an identification marking consisting of or including one of the following combinations of letters and figures:
FE 2100
G 70360-33
or
other identification markings relating to adaptor circuits complying with the abovementioned description
2.1
ex 8542.11.99
Pulse code modulation (PCM) Codec and filter of NMOS (including H-MOS technology), in the form of a monolithic integrated circuit, consisting of a fully integrated PCM Codec with transmit/receive filters, contained in a housing the exterior dimensions of which do not exceed 10×23 mm, with not more than 16 connecting pins and bearing:
an identification marking either consisting of or including one of the following combinations of figures:
2916
2917
or
other identification markings relating to PCM Codec and filter devices complying with the abovementioned description
2.1
ex 8542.11.91
Electronic circuit for synchronizing signals between the user and the exchange in a telephone system, in the form of a monolithic integrated circuit, contained in a housing the exterior dimensions of which do not exceed 14×37 mm, with not more than 28 connecting pins and bearing:
an identification marking either consisting of or including the following combination of figures and letters:
QMV 18 CW 1
or
other identification markings relating to microcircuits complying with the abovementioned description
2.1
ex 8542.11.91
Monolithic integrated circuit for scanning and distributing logic signals, for use in telephone exchanges, contained in a housing the exterior dimensions of which do not exceed 14×53 mm, with not more than 40 connecting pins and bearing:
an identification marking either consisting of or including the following combination of figures and letters:
QMV 16 BW 1
or
other identification markings relating to integrated circuits complying with the abovementioned description
2.1
ex 8542.11.91
Monolithic integrated interface circuit for pulse code modulation (PCM), of C-MOS technology, with encoding, decoding and filtering functions and a processing frequency of 2,565 MHz, contained in a housing the exterior dimensions of which do not exceed 10×28 mm, with not more than 22 connecting pins and bearing:
an identification marking either consisting of or including the following combination of figures and letters:
QMV 81 AD 1
or
other identification markings relating to integrated circuits complying with the abovementioned description
2.1
ex 9013.80.00
Liquid crystal devices (LCD), whose external dimensions do not exceed 40×154 mm with not more than 192 contact areas, consisting of a layer of liquid crystal between two glass sheets or plates with a minimum of 7 and a maximum of 32 figures or letters, and bearing:
an identificatiion marking either consisting of one of the following combination of figures or including one of those combinations, from 1000000-0001 to 9999999-9999
or
other identification markings relating to liquid crystal devices complying with the abovementioned description
1
ex 9021.90.90
Portable reading appliance for the visually handicapped in which a fibre optic camera transmits a magnified image on to a display screen, and parts thereof
0.7

---
Source: https://www.legislation.gov.uk/uksi/1987/2183/schedule/5 (the official version)
Page: https://openlegislation.uk/customs-duties-spain-and-portugal-order-1987/schedule-5
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.