Paragraph 14 Interpretation

In this schedule—

• “the holder of the licence” means any person to whom a licence has been granted or jointly granted,

• “Electrical Installation Condition Report” means a report containing the following information—

  1. (a)

     the date on which the inspection was carried out,

  2. (b)

     the address of the premises inspected,

  3. (c)

     the name, address and relevant qualifications of the person who carried out the inspection,

  4. (d)

     a description, and the location, of each installation, fixture, fitting and appliance inspected,

  5. (e)

     any defect identified,

  6. (f)

     any action taken to remedy a defect,

• “Energy Performance Certificate” has the same meaning as in the Energy Performance of Buildings (Scotland) Regulations 2008^f1,

• “gas safety report” means a report containing the following information—

  1. (a)

     the date on which the appliance or flue was checked,

  2. (b)

     the address of the premises at which the appliance or flue is installed,

  3. (c)

     a description of and the location of each appliance or flue checked,

  4. (d)

     any safety defect identified,

  5. (e)

     any remedial action taken,

  6. (f)

     confirmation that the check undertaken complies with the requirements of an examination of —

     1. (i)

        the effectiveness of any flue,

     2. (ii)

        the supply of combustion air,

     3. (iii)

        subject to head (iv), its operating pressure or heat input or, where necessary, both,

     4. (iv)

        if it is not reasonably practicable to examine its operating pressure or heat input (or, where necessary, both), its combustion performance,

     5. (v)

        its operation so as to ensure its safe functioning,

  7. (g)

     the name and signature of the individual carrying out the check, and

  8. (h)

     the registration number with which that individual, or that individual’s employer, is registered with a body approved by the Health and Safety Executive for the purposes of regulation 3(3) of the Gas Safety (Installation and Use) Regulations 1998^f2, and

• “repairing standard” means the steps which the holder of the licence is required to take to comply with the obligations placed on the holder by Chapter 4 of Part 1 of the Housing (Scotland) Act 2016.