Paragraph 2

The information referred to in paragraph 1(b) is—

(a)

the name and address of the testing laboratory by which tests have been carried out;

(b)

the name and signature of the person authorised by the testing laboratory to issue the certificate;

(c)

the date of issue of the certificate together with a certificate reference number;

(d)

the date of the accreditation of the testing laboratory to EN ISO/IEC 17025:2005 and the accreditation number;

(e)

the name, model, manufacturer and installation capacity of the plant tested;

(f)

the date of the testing;

(g)

confirmation that—

(i)

emissions of NOx and PM have been tested on the same occasion;

(ii)

the testing was in accordance with the requirements set out in paragraph 3 or 4; and

(iii)

the test was carried out at no less than 85% of the installation capacity of the plant;

(h)

confirmation that when tested as specified in sub-paragraph (g)—

(i)

emissions of PM from the plant did not exceed 30 grams of PM per gigajoule net heat input; and

(ii)

emissions of NOx did not exceed 150 grams of NOx per gigajoule net heat input;

(i)

the actual emissions of PM and NOx measured when the plant was tested as specified in sub-paragraph (g);

(j)

a list of—

(i)

the types of fuel used during the testing; and

(ii)

the types of fuel which can be used so as to ensure that the emission limits referred to in sub-paragraph (h) are not exceeded;

(k)

the moisture content of the fuel used during testing and the maximum moisture content which can be used so as to ensure that the emission limits referred to in sub-paragraph (h) are not exceeded;

(l)

a statement indicating whether or not the plant tested was a manually stoked natural draught plant;

(m)

a list of plants, other than the plant tested, in the type-testing range of plants for the certificate, if any.