{
  "url": "https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-2/paragraph-2",
  "json_url": "https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-2/paragraph-2.json",
  "legislation": "ukdsi/2019/9780111177495",
  "legislation_title": "The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019",
  "legislation_url": "https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019",
  "path": "schedule/2/paragraph/2",
  "kind": "paragraph",
  "number": "2",
  "heading": "Commission Regulation (EC) No 107/2009",
  "text": "(1) Commission Regulation (EC) No 107/2009 of 4 February 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for simple set-top boxes is amended as follows.\n(2) In Article 2 (definitions), at the beginning, for the words from “For the purposes” to “also apply:”, substitute—\n“The definitions set out in the Ecodesign for Energy-Related Products Regulations 2010 apply; and for any term that is not defined in those Regulations, the definitions set out in Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products, as it had effect immediately before exit day, apply. The following definitions also apply—”.\n(3) For Article 5 (conformity assessment), substitute—\n“For the purposes of regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010, the procedure for assessing whether an energy-related product complies with this implementing measure is the internal design control system set out in Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 or the management system for assessing conformity set out in Part 2 of Schedule 1A to those Regulations.”.\n(4) Omit Article 8 (revision).\n(5) At the end of Article 9 (entry into force), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.\n(6) Annex 2 (product compliance verification by market surveillance authorities) is amended as follows—\n(a) in each instance, for “Member State” or “Member States”, substitute “United Kingdom”;\n(b) for the second paragraph, substitute—\n“When verifying the compliance of a product model with the requirements laid down in this Regulation, for the requirements referred to in this Annex the authorities of the United Kingdom must apply the following procedure—”;\n(c) in subparagraph (2)(a)—\n(i) for “point 2 of Annex IV to Directive 2009/125/EC (declared values)” substitute “paragraph 1(2) of Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010”; and\n(ii) for “paragraph (g) thereof”, substitute “paragraph 1(2)(b)(vii) of Part 1 of Schedule 1A to those Regulations”;\n(d) subparagraph (7) is omitted;\n(e) in the fourth paragraph—\n(i) for “7” substitute “6”; and\n(ii) for “harmonised” substitute “designated”.\n(7) In Annex 3 (benchmarks), in the first paragraph, for “purpose of Annex I, part 3, point 2, of Directive 2005/32/EC” substitute “purposes of this Regulation”.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/ukdsi/2019/9780111177495/schedule/2/paragraph/2",
    "retrieved_at": "2026-10-30T15:02:23.203502+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}