Paragraph 4 Commission Regulation (EC) No 245/2009

for the first paragraph, substitute—

“1.

For the purposes of regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010, the procedure for assessing whether an energy-related product complies with this implementing measure is the internal design control system set out in Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 or the management system for assessing conformity set out in Part 2 of Schedule 1A to those Regulations.”;

in the second paragraph, for “Article 8 of Directive 2005/32/EC” substitute “regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010”.

in paragraph 1, for “Article 8 of Directive 2009/125/EC” substitute “regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010”;

for paragraph 2(b), substitute—

“(b)

lamps that immediately before exit day would have been covered by the requirements of Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres^f1 or Directive 1999/92/EC of the European Parliament and of the Council of 16 December 1999 on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres^f2;”;

for paragraph 2(c), substitute—

“(c)

emergency lighting luminaires and emergency sign luminaires within the meaning of Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits^f3 immediately before exit day;”;

for paragraph 2(e) substitute—

“(e)

luminaires that immediately before exit day would have been covered by the requirements of—

(i)

Directive 2014/34/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially explosive atmospheres^f4;

(ii)

Directive 1999/92/EC of the European Parliament and of the Council of 16 December 1999 on minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres^f5;

(iii)

Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC^f6;

(iv)

Council Directive 93/42/EEC of 14 June 1993 concerning medical devices^f7; or

(v)

Directive 2009/48/EC of the European Parliament and of the Council of 18 June 2009 on the safety of toys^f8; and

(f)

luminaires integrated into equipment that immediately before exit day would have been covered by the requirements referred to in (e)(i) to (v).”;

in the final paragraph, for “Article 8 of Directive 2009/125/EC”, substitute “regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010”.

in the first subparagraph of paragraph 1.3, for “Article 8 of Directive 2005/32/EC”, substitute “regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010”;

in the first subparagraph of paragraph 2.2, for “Article 8 of Directive 2005/32/EC”, substitute “regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010”;

in the second subparagraph of section A of paragraph 3.2, for “Article 8 of Directive 2005/32/EC”, substitute “regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010”.

in each instance, for the words “Member State” or “Member States”, substitute “United Kingdom”;

omit “referred to in Article 3(2) of Directive 2005/32/EC”;

in the second paragraph, omit the words from “, including” to “Union”.