# The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019, Paragraph 5: Commission Delegated Regulation (EU) No 626/2011


(1) Commission Delegated Regulation (EU) No 626/2011 of 4 May 2011 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of air conditioners is amended as follows.
(2) In Article 3 (responsibilities of suppliers), in paragraph 1(c) for “Member States and to the Commission”, substitute “United Kingdom”.
(3) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “the authorities of the United Kingdom”.
(4) Omit Article 7 (revision).
(5) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(6) In Annex 1 (definitions applicable for the purposes of Annexes 2 to 7), for subparagraph (8) substitute—
“(8) ‘off mode’ means a condition in which the equipment is connected to a mains power source and is not providing any function other than—
(a) an indication of off mode condition; or
(b) functionalities intended only to ensure electromagnetic compatibility pursuant to the Electromagnetic Compatibility Regulations 2016;”.
(7) In Annex 3 (the label) in subparagraph (b) of—
(a) paragraph 1.1 of section 1, after “‘EU eco-label’”, insert “before exit day”;
(b) paragraph 2.1 of section 2, after “‘EU eco-label’”, insert “before exit day”;
(c) paragraph 3.1 of section 3, after “‘EU eco-label’”, insert “before exit day”;
(d) paragraphs 4.1, 4.3 and 4.5 of section 4, in each instance, after “‘EU eco-label’”, insert “before exit day”; and
(e) paragraphs 5.1, 5.3 and 5.5 of section 5, in each instance, after “‘EU eco-label’”, insert “before exit day”.
(8) In Annex 4 (product fiche), for paragraph 1(c) substitute “where a model has been granted a ‘European Union eco-label’ under Regulation (EC) No 66/2010 before exit day, a copy of the eco-label may be added;”.
(9) In Annex 5 (technical documentation), in subparagraph (c), for “harmonised”, substitute “designated”.
(10) In Annex 7 (measurements and calculations), in paragraph 1, for the words from “harmonised” to “Union”, substitute “designated standards”.
(11) In Annex 8 (product compliance verification by market surveillance authorities)—
(a) for each instance of “Member State” or “Member States”, substitute “United Kingdom”;
(b) omit subparagraph (7);
(c) in the fourth paragraph—
(i) for “7” substitute “6”; and
(ii) for “harmonised” substitute “designated”.

---
Source: https://www.legislation.gov.uk/ukdsi/2019/9780111177495/schedule/5/paragraph/5 (the official version)
Page: https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-5/paragraph-5
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

