# The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019, Paragraph 7: Commission Delegated Regulation (EU) No 874/2012


(1) Commission Delegated Regulation (EU) No 874/2012 of 12 July 2012 supplementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of electrical lamps and luminaires is amended as follows.
(2) In Article 3 (responsibilities of suppliers)—
(a) in paragraphs 1(b) and 2(a), in both instances, for the words “Member States and to the Commission”, substitute “United Kingdom”;
(b) in paragraph 2(d), for the words from “Commission” to “Directive 2009/125/EC” substitute “any other requirements for lamps”;
(c) in the third paragraph, after “Directive 2009/125/EC” insert “or other ecodesign legislation”.
(3) In Article 4 (responsibilities of dealers), in paragraph 2(c) for the words from “Commission” to “Directive 2009/125/EC”, substitute “any other requirements for lamps”.
(4) In Article 6 (verification procedure for market surveillance purposes), for “Member States”, substitute “The authorities of the United Kingdom”.
(5) Omit Article 7 (revision).
(6) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.
(7) In Annex 1 (label), in the final paragraph of section 1, after “‘EU ecolabel’” insert “before exit day”.
(8) In Annex 3 (technical documentation)—
(a) in subparagraph (c), for “harmonised”, substitute “designated”;
(b) at the end of the second paragraph, insert “or measures listed in paragraph 4 of Schedule 1 to the Ecodesign for Energy-Related Products Regulations 2010”.
(9) In Annex 5 (product compliance verification by market surveillance authorities)—
(a) for each instance of “Member State” or “Member States”, substitute “United Kingdom”;
(b) in section 1—
(i) omit subparagraph (4);
(ii) for the first paragraph, substitute—
“The United Kingdom authorities must use measurement procedures which take into account the generally recognised, state-of-the-art, reliable, accurate and reproducible measurement methods, and must use the measurement and calculation methods set out in Annex 7.”;
(iii) in the second paragraph—
(aa) for “4” substitute “3”; and
(bb) for “harmonised” substitute “designated”.

---
Source: https://www.legislation.gov.uk/ukdsi/2019/9780111177495/schedule/5/paragraph/7 (the official version)
Page: https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-5/paragraph-7
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.