{
  "url": "https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-amendment-regulations-2021/regulation-4",
  "json_url": "https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-amendment-regulations-2021/regulation-4.json",
  "legislation": "ukdsi/2021/9780348225549",
  "legislation_title": "The Ecodesign for Energy-Related Products and Energy Information (Amendment) Regulations 2021",
  "legislation_url": "https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-amendment-regulations-2021",
  "path": "regulation/4",
  "kind": "regulation",
  "number": "4",
  "heading": "Amendments to Commission Delegated Regulation (EU) 2019/2013: electronic displays",
  "text": "(1) Commission Delegated Regulation (EU) 2019/2013 of 11 March 2019 supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of electronic displays and repealing Commission Delegated Regulation (EU) No 1062/2010, as modified by Schedule 1 to the Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020, is amended as follows.\n(2) In Article 1(2) (subject matter and scope), in point (g), for “of products covered by implementing measures adopted under the Ecodesign for Energy-Related Products Regulations 2010” substitute “within the meaning given by regulation 2(1) of the Ecodesign for Energy-Related Products Regulations 2010”.\n(3) In Article 2 (definitions)—\n(a) in point (10), for “as defined in Article 1” substitute “and is to be construed in accordance with the definitions of ‘networked equipment with high network availability’ and ‘networked equipment with high network availability functionality’ in Article 2”;\n(b) omit point (17).\n(4) In Article 3(1) (obligations of suppliers), for point (b) substitute—\n“(b) the information set out in table 4 of Annex 5 (product information sheet) is made available on a publicly accessible website;”.\n(5) In Annex 1 (definitions for the purposes of the Annexes), after point (28) insert—\n“(29) ‘declared values’ means the values provided by the supplier in the technical documentation in accordance with point (4) of Annex 6 for the verification of conformity by the market surveillance authority;\n(30) ‘guarantee’ means any undertaking by the dealer or the supplier to the consumer that, if an electronic display does not meet the specifications set out in the guarantee statement or in any associated advertising—\n(a) the consumer will be reimbursed for the price paid for the electronic display; or\n(b) the electronic display will be repaired, replaced or handled in any way.”.\n(6) In Annex 2, in point B (energy efficiency index)—\n(a) after the formula, in the explanation of term “A” in the formula, for “viewing surface area” substitute “visible screen area”;\n(b) after the explanation of term “corr1” in the formula, insert—\n“For the purposes of the EEI calculation, the declared values of the following technical parameters listed in Table 5 of Annex 6 (technical documentation) must be used—\n(a) on mode power demand (Pmeasured );\n(b) visible screen area.”.\n(7) In Annex 3, in point 2 (label design)—\n(a) at the beginning of point (f) insert “Subject to point (g)”;\n(b) after point (f) insert—\n“(g) If the electronic display does not support HDR—\n(i) the following must not be displayed—\n(aa) the HDR pictogram; and\n(bb) the energy efficiency class; and\n(ii) the screen pictogram, indicating screen size and resolution, must be vertically centred in the area below the indication of the energy consumption.”.\n(8) In Annex 5 (product information sheet)—\n(a) number the first paragraph as paragraph 1;\n(b) number the second paragraph as paragraph 2;\n(c) for Table 4 substitute—\n“\nTable 4\nInformation, order and format of the product information sheet\nParameter\nValue\nUnit\nNotes\n1.\nSupplier’s name or trade mark\nTEXT\n2.\nSupplier’s address\n3.\nModel identifier\nTEXT\n4.\nEnergy efficiency class for standard Dynamic Range (SDR)\n[A/B/C/D/E/F/G]\n5.\nOn mode power demand in Standard Dynamic Range (SDR)\nX.X\nW\nRounded to the nearest decimal place for power values below 100 W and rounded to the nearest integer for power values equal to or above 100 W.\n6.\nEnergy Efficiency class (HRD)\n[A/B/C/D/E/F/G] or n.a.\nValue must be ‘n.a.’ (not applicable) if HDR is not implemented.\n7.\nOn mode power demand in High Dynamic Range (HDR)\nX.X\nW\nRounded to the nearest decimal place for power values below 100 W and rounded to the nearest integer for power values equal to or above 100 W. Value is 0 (zero) if HRD is not implemented.\n8.\nOff mode, power demand, if applicable\nX.X\nW\n9.\nStandby mode power demand, if applicable\nX.X\nW\n10.\nNetworked standby mode power demand, if applicable\nX.X\nW\n11.\nElectronic display category\n[television/monitor/ signage/other]\nSelect one.\n12.\nSize ratio\nX\n:\nY\ninteger\nFor example 16:9. 21:9, etc.\n13.\nScreen resolution\nX\n×\nY\npixels\nHorizontal and vertical pixels.\n14.\nScreen diagonal\nX.X\ncm\nRounded to one decimal place.\n15.\nScreen diagonal\nX\ninches\nOptional, in inches rounded to the nearest integer.\n16.\nVisible screen area\nX.X\ndm2\nRounded to one decimal place.\n17.\nPanel technology used\nTEXT\nE.g. LCD/LED LCD/QLED LCD/OLED/MicroLED/\nQDLED/SED/FED/EPD, etc.\n18.\nAvailability of Automatic Brightness Control (ABC)\n[YES/NO]\n19.\nAvailability of voice recognition sensor\n[YES/NO]\n20.\nAvailability of room presence sensor\n[YES/NO]\n21.\nImage refresh frequency rate (default)\nX\nHz\n22.\nMinimum guaranteed availability of software and firmware updates\nX\nYears\n23.\nMinimum guaranteed availability of spare parts\nX\nYears\n24.\nMinimum guaranteed product support\nX\nYears\n25.\nMinimum duration of the guarantee given by the supplier\nX\nYears\n26.\nPower supply type\nInternal / External / Standardised external\nSelect one.\n27.\nExternal power supply (non-standardized and included in the product box)\ni\nSupported standard name or list\nTEXT\nDescription\nii\nInput\nvoltage\nX\nV\niii\nOutput voltage\nX.X\nV\n28.\nExternal standardised power supply (or suitable one if not included in the product box)\ni\nSupported standard name or list\nTEXT\nii\nRequired output voltage\nX.X\nV\nIii\nRequired delivered current (minimum)\nX.X\nA\niv\nRequired current frequency\nX.X\nHz\n”;\n(d) after Table 4 insert—\n“3. The following items in Table 4 are not relevant for the purposes of determining whether a model is an equivalent model under Article 2(6) of the Framework Regulation—\n(a) supplier’s name or trade mark;\n(b) supplier’s address;\n(c) model identifier;\n(d) minimum guaranteed availability of software and firmware updates;\n(e) minimum guaranteed availability of spare parts;\n(f) minimum guaranteed product support;\n(g) minimum duration of the guarantee given by the supplier.”.\n(9) In Annex 6 (technical documentation)—\n(a) for points (1) to (5) substitute—\n“(1) a general description of the model, sufficient for it to be unequivocally and easily identified;\n(2) references to the designated standards applied or other measurement standards used;\n(3) specific precautions that must be taken when the model is assembled, installed, maintained or tested;\n(4) the values of the technical parameters set out in Table 5;\n(5) the details and the results of the calculations performed in accordance with Annex 4;\n(5A) the conditions of testing that must be applied, if not fully described in the information provided under point (2);\n(5B) the identifier of all equivalent models already placed on the market;”;\n(b) for Table 5 substitute—\n“\nTable 5\nTechnical parameters of the model and declared values\nParameter\nValue\nUnit\nDeclared value\nGeneral\n1\nSupplier’s name or trade mark\nTEXT\n2\nModel identifier\nTEXT\n3\nOn mode power demand, (Pmeasured)\nXXX.X\nW\n4\nEnergy efficiency class for Standard Dynamic Range (SDR)\n[A/B/C/D/E/F/G]\n5\nOn mode power demand in Standard Dynamic Range (SDR)\nXXX.X\nW\n6\nEnergy efficiency class for Dynamic Range (HDR)\n[A/B/C/D/E/F/G] or n.a.\n7\nOn mode power demand in High Dynamic Range (HDR)\nXXX.X\nW\n8\nOff mode, power demand\nX.X\nW\n9\nStandby mode power demand\nX.X\nW\n10\nNetworked standby mode power demand\nX.X\nW\n11\nElectronic display category\n[television / monitor / signage / other]\nTEXT\n12\nSize ratio\nXX\n:\nXX\n13\nScreen resolution (pixels)\nX\n×\nX\n14\nScreen diagonal\nXXX.X\ncm\n15\nScreen diagonal\nXX\ninches\n16\nVisible screen area\nXXX.X\ndm2;\n17\nPanel technology used\nTEXT\n18\nAvailability of automatic Brightness Control (ABC)\n[YES/NO]\n19\nAvailability of voice recognition sensor\n[YES/NO]\n20\nAvailability of room presence sensor\n[YES/NO]\n21\nImage refresh frequency rate (normal configuration)\nXXX\nHZ\n22\nMinimum guaranteed availability of software and firmware updates\nXX\nYears\n23\nMinimum guaranteed availability of spare parts\nXX\nYears\n24\nMinimum guaranteed product support\nXX\nYears\n25\nMinimum duration of the guarantee given by the supplier\nXX\nYears\nFor On-mode\n26\nPeak white luminance of the brightest on mode configuration\nXXXX\ncd/ m2\n27\nPeak white luminance of the normal configuration\nXXXX\ncd/ m2\n28\nPeak white luminance ratio (calculated as the value of ‘Peak white luminance of the normal configuration’ divided by the value of ‘Peak white luminance of the brightest on mode configuration’ multiplied by 100)\nXX.X\n%\nFor Auto Power Down (APD)\n29\nLength of time in on mode before the electronic display automatically switches to standby, off mode, or another condition which does not exceed the applicable power demand requirements for off mode or standby mode\nXX:XX\nmm:ss\n30\nFor televisions: the length of time following the last user interaction before the television automatically switches to standby, off-mode or another condition which does not exceed the applicable power consumption requirements for off-mode or standby-mode\nXX:XX\nmm:ss\n31\nFor televisions equipped with room presence sensor: the length of time after no presence is detected before the television automatically switches to standby, off-mode or another condition which does not exceed the applicable power demand requirements for off mode or standby mode\nXX:XX\nmm:ss\n32\nFor electronic displays other than televisions and broadcast displays: the length of time after no input is detected before the electronic display automatically switches to standby, off-mode, or another condition which does not exceed the applicable power consumption requirements for off mode or standby mode\nXX:XX\nmm:ss\nFor ABC\nIf available and activated by default\n33\nPercentage of power reduction due to ABC action between the 100 lux and 12 lux ambient light conditions\nXX.X\n%\n34\nOn mode power at 100 lux ambient light at the ABC sensor\nXXX.X\nW\n35\nOn mode power at 12 lux ambient light at the ABC sensor\nXXX.X\nW\n36\nScreen luminance at 100 lux ambient light at the ABC sensor\nXXX\ncd/ m2\n37\nScreen luminance at 60 lux ambient light at the ABC sensor\nXXX\ncd/ m2\n38\nScreen luminance at 35 lux ambient light at the ABC sensor\nXXX\ncd/ m2\n39\nScreen luminance at 12 lux ambient light at the ABC sensor\nXXX\ncd/ m2\nFor Power Supply\n40\nPower supply type\nInternal/External\n41\nStandard references (if applicable)\nTEXT\n42\nInput voltage\nXXX.X\nV\n43\nOutput voltage\nXXX.X\nV\n44\nInput current (max)\nXXX.X\nA\n45\nOutput current (min)\nXXX.X\nA\n”.\n(10) In Annex 9 (verification procedure for market surveillance purposes)—\n(a) for the first paragraph substitute—\n“The verification tolerances set out in this Annex relate only to the verification by the market surveillance authority of the declared values.\nThe supplier of a product must not use the verification tolerances—\n(a) as allowed tolerances to establish the declared values;\n(b) to interpret the declared values; or\n(c) to communicate better performance.\nThe values and classes published on the label or in the product information sheet must not be more favourable to the supplier than the declared values.”;\n(b) in point 2—\n(i) in point (a), for “values given in the technical documentation pursuant to point 3 of Article 3 of Regulation (EU) 2017/1369 (declared values)” substitute “declared values”;\n(ii) in point (c), for the words after “comply with” substitute—\n“(i) in the case of the determined values of the ABC luminance-related parameters (see rows 36 to 39 of Table 5 of Annex 6), the requirements in point (e) of point C of Annex 2; and\n(ii) otherwise, the respective verification tolerances set out in Table 6.”.\n(c) for point (3) substitute—\n“(3) The model and all equivalent models must be considered not to comply with this Regulation if—\n(a) the result referred to in point 2(a), (b) or (c)(i) is not achieved; or\n(b) the determined value of a parameter listed in rows 3 to 5 or 7 to 10 of Table 6 does not comply with the applicable verification tolerance set out in Table 6.”;\n(d) in point (4), for “If the result referred to in point 2(c) is not achieved” substitute “If the determined value of a parameter listed in row 1, 2 or 6 of Table 6 does not comply with the respective verification tolerance set out in Table 6 (so that the result referred to in point 2(c) is not achieved)”;\n(e) in the final paragraph before Table 6, for “points 1 to 7” substitute “points 1 to 6”;\n(f) for Table 6 substitute—\n“\nTable 6\nVerification tolerances\nParameter\nVerification tolerances\n1.\nOn mode power demand, (Pmeasured, Watts)\nThe determined value must not exceed the declared value by more than 7 %.\n2.\nOff mode, standby mode and networked standby mode power demand (Watts), as applicable\nThe determined value must not exceed the declared value by more than 0.10 Watt if the declared value is 1.00 W or less, or by more than 10 % if the declared value is more than 1.00 W.\n3.\nVisible screen area\nThe determined value must not be lower than the declared value by more than whichever is the smaller of 1 % or 0.1 dm2.\n4.\nVisible screen diagonal in centimetres\nThe determined value must not differ from the declared value by more than 1 cm.\n5.\nThe screen resolution in horizontal and vertical pixels\nThe determined value must not differ from the declared value.\n6.\nPeak white luminance\nThe determined value must not be lower than the declared value by more than 8 %.\n7.\nLength of time in on mode before the electronic display automatically switches to standby, off mode or another condition which does not exceed the applicable power demand requirements for off mode or standby mode\nThe determined value must not exceed the declared value by more than 5 seconds.\n8.\nFor televisions: the length of time after the last user interaction before the television automatically switches to standby, off-mode, or another condition which does not exceed the applicable power consumption requirements for off mode or standby mode\nThe determined value must not exceed the declared value by more than 5 seconds.\n9.\nFor televisions equipped with room presence sensor: the length of time after no presence is detected before the television automatically switches to standby, off-mode, or another condition which does not exceed the applicable power demand requirements for off mode or standby mode\nThe determined value must not exceed the declared value by more than 5 seconds.\n10.\nFor electronic displays other than televisions and broadcast displays: the length of time after no input is detected before the electronic display automatically switches to standby, off-mode or another condition which does not exceed the applicable power consumption requirements for off mode or standby mode\nThe determined value must not exceed the declared value by more than 5 seconds.\n”.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "EUR 2019/2013, amended and modified by S.I. 2020/1528."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/ukdsi/2021/9780348225549/regulation/4",
    "retrieved_at": "2026-10-30T14:46:51.538846+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}