OpenLegislation

Paragraph 3 Verification procedure

Original text. Later amendments are not shown.

The product model conforms to these Regulations if all the following conditions are satisfied in respect of the product model—

(a)

the declared values and, where applicable, the values used to calculate the declared values, are not more favourable for the supplier than the corresponding measurements carried out pursuant to paragraph 1(2)(b)(vii) or 5(2)(d) of Schedule 1A to the 2010 Regulations;

(b)

the values published on the label and in the product information sheet are not more favourable for the supplier than the declared values;

(c)

the indicated energy efficiency class is not more favourable for the supplier than the class determined by the declared values; and

(d)

the determined values comply with the respective verification tolerances as given in Table 14, and for this purpose the determined values are calculated as—

(i)

the arithmetic mean over the tested units of the measured values for a given parameter; or

(ii)

the arithmetic mean of parameter values calculated from measured values.