Paragraph 1 Product information sheet
The product information sheet must contain the information set out in Table 6.
Table 6
Product information sheet
| Supplier’s name or trade mark: | ||||
| Supplier’s address: | ||||
| Model identifier: | ||||
| Type of light source: | ||||
| Lighting technology used: | [HL/LFL T5 HE/LFL T5 HO/CFLni/other FL/HPS/MH/other HID/LED/OLED/mixed/other] | Non-directional or directional: | [NDLS/DLS] | |
| Light source cap-type (or other electric interface) | [Free text] | |||
| Mains or non-mains: | [MLS/NMLS] | Connected light source (CLS): | [yes/no] | |
| Colour-tuneable light source: | [yes/no] | Envelope: | [no/second/non-clear] | |
| High luminance light source: | [yes/no] | |||
| Anti-glare shield: | [yes/no] | Dimmable: | [yes/only with specific dimmers/no] | |
| Product parameters | ||||
| Parameter | Value | Parameter | Value | |
| General product parameters | ||||
| Energy consumption in on-mode (kWh/1,000 h) rounded up to the nearest integer | x | Energy efficiency class | [A/B/C/D/E/F/G] | |
| Useful luminous flux (Φuse), indicating if it refers to the flux in a sphere (360°), in a wide cone (120°) or in a narrow cone (90°) | x in [sphere/wide cone/narrow cone] | Correlated colour temperature, rounded to the nearest 100K, or the range of correlated colour temperatures, rounded to the nearest 100K, that can be set | [x/x…x/x or x (or x…)] | |
| On-mode power (Pon), expressed in W | x.x | Standby power (Psb), expressed in W and rounded to the second decimal point | x.xx | |
| Networked standby power (Pnet) for CLS, expressed in W and rounded to the second decimal point | x.xx | Colour rendering index, rounded to the nearest integer, or the range of CRI-values that can be set | [x/x…x] | |
| Outer dimensions without separate control gear, lighting control parts and non-lighting control parts, if any (millimetre) | Height | x | Spectral power distribution in the range 250 nm to 800 nm, at full-load | [graphic] |
| Width | x | |||
| Depth | x | |||
| Claim of equivalent power (see paragraph [2(1) and (2)]) | [yes/-] | If yes, equivalent power (W) | x | |
| Chromaticity coordinates (x and y) | 0.xxx 0.xxx | |||
| Parameters for directional light sources: | ||||
| Peak luminous intensity (cd) | x | Beam angle in degrees, or the range of beam angles that can be set | [x/x…x] | |
| Parameters for LED and OLED light sources: | ||||
| R9 colour rendering index value | x | Survival factor | x.xx | |
| The lumen maintenance factor | x.xx | |||
| Parameters for LED and OLED mains light sources: | ||||
| Displacement factor (cos φ1) | x.xx | Colour consistency in McAdam ellipses | x | |
| Claims that an LED light source replaces a fluorescent light source without integrated ballast of a particular wattage (see paragraph [2(3)]. | [yes/-] | If yes then replacement claim (W) | x | |
| Flicker metric (Pst LM) | x.x | Stroboscopic effect metric (SVM) | x.x | |