{
  "url": "https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-lighting-products-regulations-2021/schedule-9/paragraph-1",
  "json_url": "https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-lighting-products-regulations-2021/schedule-9/paragraph-1.json",
  "legislation": "ukdsi/2021/9780348225488",
  "legislation_title": "The Ecodesign for Energy-Related Products and Energy Information (Lighting Products) Regulations 2021",
  "legislation_url": "https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-lighting-products-regulations-2021",
  "path": "schedule/9/paragraph/1",
  "kind": "paragraph",
  "number": "1",
  "heading": null,
  "text": "The technical documentation referred to in regulation 12(1)(e) must include the following—\n(a) the name and address of the supplier;\n(b) the supplier’s model identifier;\n(c) the model identifier of all equivalent models already placed on the market;\n(d) identification and signature of the person empowered to bind the supplier;\n(e) the declared values for the following technical parameters—\n(i) useful luminous flux (Φuse) in lm;\n(ii) colour rendering index (CRI);\n(iii) on-mode power (Pon) in W;\n(iv) beam angle in degrees for directional light sources (DLS);\n(v) peak luminous intensity in cd for directional light sources (DLS);\n(vi) correlated colour temperature (CCT) in K;\n(vii) standby power (Psb) in W, including when it is zero;\n(viii) networked standby power (Pnet) in W for connected light sources (CLS);\n(ix) R9 colour rendering index value for LED and OLED light sources;\n(x) survival factor for LED and OLED light sources;\n(xi) lumen maintenance factor for LED and OLED light sources;\n(xii) indicative lifetime L70B50 for LED and OLED light sources;\n(xiii) displacement factor (cos φ1) for LED and OLED mains light sources;\n(xiv) colour consistency in MacAdam ellipse steps for LED and OLED light sources;\n(xv) luminance-HLLS in cd/mm2 (only for HLLS)\n(xvi) flicker metric (PstLM) for LED and OLED light sources;\n(xvii) stroboscopic effect metric (SVM) for LED and OLED light sources;\n(xviii) excitation purity, only for CTLS, for the colours and dominant wavelength within the given range in the following table—\nColour\nDominant wavelength range\nBlue\n440 nm - 490 nm\nGreen\n520 nm - 570 nm\nRed\n610 nm - 670 nm\n(f) the calculations performed with the parameters, including the determination of the energy efficiency class;\n(g) references to the designated standards applied or other standards used;\n(h) testing conditions if not described fully in sub-paragraph (g);\n(i) the reference control settings, and instructions on how they can be implemented, where applicable;\n(j) instructions on how to remove lighting control parts and/or non-lighting parts, if any, or how to switch them off or minimise their power consumption during light source testing;\n(k) specific precautions that must be taken when the model is assembled, installed, maintained or tested;\n(l) where a claim of the kind referred to in paragraph 2(1) or (3) of Schedule 8 is made, the data to support such a claim.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/ukdsi/2021/9780348225488/schedule/9/paragraph/1",
    "retrieved_at": "2026-10-30T14:46:52.629854+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}