# The Ecodesign for Energy-Related Products and Energy Information Regulations 2021, Regulation 41: Conformity assessment


(1) For the purposes of the conformity assessment procedure referred to in Schedule 1A to the 2010 Regulations, a manufacturer assessing whether a product conforms with these Regulations must use either—
(a) the internal design control procedure set out in Part 1 of that Schedule; or
(b) the management system procedure set out in Part 2 of that Schedule.
(2) The technical documentation file required for the conformity assessment of a product must contain—
(a) if any plastic part is not marked in accordance with paragraph 12 of Schedule 19, the specific reason why the exemption applies;
(b) the information specified in paragraph 19 of Schedule 19; and
(c) the details and results of any measurements or calculations carried out in accordance with regulation 43 or Schedules 19 and 20.

---
Source: https://www.legislation.gov.uk/ukdsi/2021/9780348222920/regulation/41 (the official version)
Page: https://openlegislation.uk/draft-ecodesign-for-energy-related-products-and-energy-information-regulations-2021/regulation-41
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.