Paragraph 2 Verification procedure
The market surveillance authority must apply the procedure set out in the following paragraphs when verifying the compliance of a product with these Regulations, using the measurement and calculation methods provided for in Schedule 4.
The market surveillance authority must initially test one single unit of the model of the product to be verified.
Subject to paragraph 3, the model conforms to these Regulations if all the following conditions are satisfied in respect of the tested unit—
the declared values and, where applicable, the values used to calculate the declared values, are not more favourable for the supplier than the corresponding measurements carried out pursuant to paragraph 1(2)(b)(vii) or 5(2)(d) of Schedule 1A to the 2010 Regulations;
the values published on the label and in the product information sheet are not more favourable for the supplier than the declared values;
the energy efficiency class indicated on the label is not more favourable for the supplier than the class determined by the declared values; and
the determined values meet the verification tolerances set out in Table 37.