# The Environmental Permitting (England and Wales) Regulations 2016, Paragraph 14: Crushing and emptying waste vehicle oil filters (T14)


(1) The treatment of waste vehicle oil filters consisting of relevant waste by crushing and emptying them.
(2) The table specifying relevant waste for the purposes of this paragraph is set out below.
Codes
Waste types
160107*
Oil filters
(3) For the purposes of this paragraph, the specific conditions are that—
(a) the total quantity of waste stored after treatment does not exceed 1 tonne of crushed and emptied oil filters at any one time,
(b) the treatment is carried on at the place of production,
(c) the equipment used to treat the waste is—
(i) designed for the purposes of crushing oil filters;
(ii) designed and maintained to ensure that oil does not escape during treatment, and
(d) the treatment takes place as soon as practicable after the oil filter is removed from a vehicle.

---
Source: https://www.legislation.gov.uk/ukdsi/2016/9780111150184/schedule/3/part/1/chapter/3/crossheading/descriptions-and-specific-conditions/paragraph/14 (the official version)
Page: https://openlegislation.uk/draft-environmental-permitting-england-and-wales-regulations-2016/schedule-3/part-1/chapter-3/crossheading-descriptions-and-specific-conditions/paragraph-14
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.