# The Product Safety and Metrology (Amendment and Transitional Provisions) Regulations 2022, Regulation 19: Amendment of the Recreational Craft Regulations 2017


(1) The Recreational Craft Regulations 2017 are amended as follows.
(2) In regulation 89A (transitional provisions in relation to EU exit) after paragraph (5) insert—
“(6) Subject to paragraph (8), where before 11pm on 31st December 2024—
(a) a product has not been placed on the market; and
(b) a manufacturer has taken any action under the procedure that applies to that product in accordance with Articles 19 to 24 of the Directive
that action has effect as if it had been done under the applicable procedure referred to in regulation 42 or 43.
(7) Subject to paragraph (8), where before 11pm on 31st December 2024—
(a) a product has not been placed on the market or put into service; and
(b) a private importer or a person to whom regulation 43(2) applies has taken any action under the procedure that applies to that product in accordance with Article 23 of the Directive
that action has effect as if it had been done under the applicable procedure referred to in regulation 43.
(8) Paragraphs (6) and (7) do not apply—
(a) after the expiry of the validity of any certificate issued pursuant to the applicable procedure; and
(b) in any event, after 31st December 2027.”.

---
Source: https://www.legislation.gov.uk/ukdsi/2022/9780348241150/regulation/19 (the official version)
Page: https://openlegislation.uk/draft-product-safety-and-metrology-amendment-and-transitional-provisions-regulations-2022/regulation-19
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.