{
  "url": "https://openlegislation.uk/draft-product-safety-and-metrology-etc-amendment-etc-eu-exit-regulations-2019/schedule-13/paragraph-2",
  "json_url": "https://openlegislation.uk/draft-product-safety-and-metrology-etc-amendment-etc-eu-exit-regulations-2019/schedule-13/paragraph-2.json",
  "legislation": "ukdsi/2019/9780111180402",
  "legislation_title": "The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019",
  "legislation_url": "https://openlegislation.uk/draft-product-safety-and-metrology-etc-amendment-etc-eu-exit-regulations-2019",
  "path": "schedule/13/paragraph/2",
  "kind": "paragraph",
  "number": "2",
  "heading": "Amendment to regulation 2",
  "text": "(1) Regulation 2 (interpretation) is amended as follows.\n(2) In paragraph (1)—\n(a) omit the definition of “compliance mark”;\n(b) for the definition of “relevant aerosol dispenser” substitute—\n““relevant aerosol dispenser” means an aerosol dispenser which does not have a maximum capacity of—\n(a) less than 50ml; or\n(b) greater than that specified—\n(i) in point 3.1 of Schedule 1A, in relation to metal aerosol dispensers (1000ml);\n(ii) in point 4.1.1 of Schedule 1A, in relation to aerosol dispensers with plastic coated or permanently protected glass containers or plastic aerosol dispensers which cannot splinter on bursting (220ml); or\n(iii) in point 4.2.1 of Schedule 1A, in relation to aerosol dispensers with unprotected glass containers or plastic aerosol dispensers which may splinter on bursting (150ml);”.\n(c) after the definition of “relevant aerosol dispenser” insert—\n““UK marking” means the marking in the form set out in Annex 2 of Regulation (EC) No 765/2008 of the European Parliament and of the Council of 9 July 2008 setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93.”.\n(3) After paragraph (1) insert—\n“(1A) Schedule 1A reproduces the provisions of the Annex to the Directive with amendments to correct deficiencies in retained EU law.\n(1B) A reference to a provision of Schedule 1A is a reference to the equivalent provision of the Annex to the Directive as set out in that Schedule.”.\n(4) In paragraph (2)—\n(a) for “the Annex to the Directive” substitute “Schedule 1A”;\n(b) after “is a reference to” insert “a test method specified in point 6.1.4.1(b) or (c) which is”;\n(c) in subparagraph (a)—\n(i) for “that Annex” substitute “the Annex to the Directive”;\n(ii) after “point 6.1.4.3” insert “of that Annex”;\n(d) in subparagraph (b) after “6.1.4.3” insert “of Schedule 1A”.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/ukdsi/2019/9780111180402/schedule/13/paragraph/2",
    "retrieved_at": "2026-10-30T15:00:57.296945+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}