# The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019, Paragraph 3: Amendment to regulation 3


In regulation 3 (requirements for the marking of aerosol dispensers)—
(a) in paragraph (1) for “a compliance mark” substitute “the UK marking”;
(b) in each place in which it occurs, for “the Annex to the Directive” substitute “Schedule 1A”;
(c) in paragraph (7)(b) after “6.1.3” insert “of Schedule 1A”;
(d) in paragraph (7)(c)—
(i) after “6.1.4.1(a)”, “6.1.4.1(b)” and “6.1.4.1(c)” (in paragraphs (i), (ii) and (iii) respectively), insert “of Schedule 1A”;
(ii) after “6.1.4.2” in both places in which it occurs insert “of that Schedule”;
(e) for paragraph (8)(a) substitute—
“(a) the following information—
(i) the name and address or trade mark of the person responsible for marketing the aerosol dispenser;
(ii) code markings enabling the filling batch to be identified;
(iii) the details referred to in point 2.2 of Schedule 1A; and
(iv) where an aerosol dispenser—
(aa) contains flammable components as defined in point 1.8 of Schedule 1A; and
(bb) is not classified as extremely flammable or flammable in accordance with the classifications set out in point 1.9 of Schedule 1A;
the quantity of flammable material contained in the aerosol dispenser must be clearly stated on the label in legible and indelible wording in the following form—
“X % by mass of the contents are flammable”;”.

---
Source: https://www.legislation.gov.uk/ukdsi/2019/9780111180402/schedule/13/paragraph/3 (the official version)
Page: https://openlegislation.uk/draft-product-safety-and-metrology-etc-amendment-etc-eu-exit-regulations-2019/schedule-13/paragraph-3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.