# The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019, Paragraph 2: Amendment to regulation 2


(1) Regulation 2 (interpretation) is amended as follows.
(2) In paragraph (1)—
(a) in the definition of “batch”—
(i) for “paragraph 1 of Annex II of the Directive” substitute “Schedule 3”;
(ii) for “the Directive” in the second place in which it occurs substitute “these Regulations”;
(b) for the definition of “importer” substitute—
““importer” means any person who—
(a) is established in the UK; and
(b) places a measuring container bottle (marked with the UK marking) from a country outside the United Kingdom onto the market;”;
(c) in the definition of “manufacturer” for “EEC sign” substitute “UK marking”;
(d) after “production control records” insert—
““UK marking” means the marking in the form set out in Annex 2 of Regulation (EC) No 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products;”.
(3) After paragraph (1) insert—
“(1A) Schedules 2 and 3 reproduce provisions of Annexes I and II (respectively) to the Directive with amendments to correct deficiencies in retained EU law.
(1B) A reference to a provision of Schedules 2 and 3 is a reference to the equivalent provision of Annexes I and II to the Directive as set out in that Schedule.”.
(4) In paragraph (3), for “the schedule” substitute “Schedule 1”.

---
Source: https://www.legislation.gov.uk/ukdsi/2019/9780111180402/schedule/4/paragraph/2 (the official version)
Page: https://openlegislation.uk/draft-product-safety-and-metrology-etc-amendment-etc-eu-exit-regulations-2019/schedule-4/paragraph-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.