# The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019, Paragraph 7: Insertion of regulation 7A


After regulation 7 insert—
“Obligations which are met by complying with obligations in the Directive
7A. (1) In this regulation any reference to an Article or an Annex is a reference to an Article or an Annex of the Directive.
(2) Paragraph (3) applies where, before a measuring container bottle is sold or supplied on the UK market, the manufacturer—
(a) has complied with the requirements of the Directive in accordance with Article 2 and Annex 1; and
(b) marks the bottle with the EEC sign in accordance with the third subparagraph of paragraph 5 of Annex 1.
(3) Where this paragraph applies—
(a) the requirements of regulations 5 and of Schedule 2 are to be treated as being satisfied;
(b) the definitions of importer and manufacturer in regulation 2(1) apply subject to the modification that the references to “UK marking” are to be read as references to the EEC sign; and
(c) regulations 4, 9 and 10 apply subject to the modifications that—
(i) any reference to “UK marking” is to be read as a reference to the EEC sign;
(ii) any reference to “these Regulations” is to be read as a reference to the Directive.”.

---
Source: https://www.legislation.gov.uk/ukdsi/2019/9780111180402/schedule/4/paragraph/7 (the official version)
Page: https://openlegislation.uk/draft-product-safety-and-metrology-etc-amendment-etc-eu-exit-regulations-2019/schedule-4/paragraph-7
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.