Regulation 7 Amendments to Commission Implementing Regulation (EU) 293/2012
Commission Implementing Regulation (EU) 293/2012 is amended as follows.
In Article 2 (definitions)—
in the words before point (1), for “Article 2 of Commission Regulation (EC) 692/2008” substitute “Article 2 of Regulation (EU) 2017/1151, as it has effect in domestic law and as that Regulation has effect in EU law as amended from time to time and by virtue of the Northern Ireland Protocol,”;
in point (1), for “including the data specified in the third column of the table set out in Annex I to this Regulation” substitute “containing the data set out in point 1.1 of Part A of Annex 3 to Regulation (EU) 2019/631”;
In Article 4 (data sources)—
in paragraph 1, for “the table in Annex I to this Regulation” substitute “point 1.1 of Part A of Annex 3 to Regulation (EU) 2019/631”;
in paragraph 6, for “Annex I to this Regulation” substitute “point 1.1 of Part A of Annex 3 to Regulation (EU) 2019/631”;
in paragraph 10, at the end insert “, as it has effect in domestic law, and as it had effect in EU law immediately before IP completion day”.
In Article 8 (vehicles not covered by EC type-approval)—
in the heading, for “EC type-approval” substitute “GB, UK (NI) or EU type-approval”;
in the first paragraph—
before “national type-approval of small series” insert “GB type-approval of small series and”;
for “Article 23 of Directive 2007/46/EC” substitute “Article 42 of Regulation (EU) 2018/858, as it has effect in domestic law or, as the case may be, as that Regulation has effect in EU law as amended from time to time and by virtue of the Northern Ireland Protocol,”;
for “Article 24 of that Directive,” substitute “Article 45 of Regulation (EU) 2018/858, as it has effect in domestic law or, as the case may be, Articles 44 and 45 of Regulation (EU) 2018/858, as it has effect in EU law as amended from time to time and by virtue of the Northern Ireland Protocol,”;
in the second paragraph—
for “Manufacturer name EU standard denomination” substitute “Manufacturer name UK standard denomination”;
in point (b), for “vehicle types approved nationally in small series” substitute “vehicles with GB type-approval of small series or national type-approval of small series”.
In Article 10 (additional information to be provided by manufacturers), in paragraph 3—
for “point 1a.1 of Part A of Annex II to Regulation (EU) No 510/2011” substitute “point 1.2.3 of Part A of Annex 3 to Regulation (EU) 2019/631”;
for “point 1c. of Part A of Annex II to that Regulation” substitute “point 1.2.2 of Part A of Annex 3 to Regulation (EU) 2019/631”.
In Article 10a (notification of errors by manufacturers), in paragraph 1, for “EC type approval” substitute “GB type-approval, UK (NI) type-approval or EU type-approval”.
For the table in Annex 1 (data sources) substitute “The relevant data parameters are those set out in point 1.1 of Part A of Annex 3 to Regulation (EU) 2019/631.”.