{
  "url": "https://openlegislation.uk/draft-road-vehicles-and-non-road-mobile-machinery-type-approval-amendment-and-transitional-provisions-eu-exit-regulations-2022/regulation-58",
  "json_url": "https://openlegislation.uk/draft-road-vehicles-and-non-road-mobile-machinery-type-approval-amendment-and-transitional-provisions-eu-exit-regulations-2022/regulation-58.json",
  "legislation": "ukdsi/2022/9780348239935",
  "legislation_title": "The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022",
  "legislation_url": "https://openlegislation.uk/draft-road-vehicles-and-non-road-mobile-machinery-type-approval-amendment-and-transitional-provisions-eu-exit-regulations-2022",
  "path": "regulation/58",
  "kind": "regulation",
  "number": "58",
  "heading": "Commission Regulation (EU) No 1003/2010",
  "text": "(1) Commission Regulation (EU) No 1003/2010 is amended as follows.\n(2) In Article 2 (provisions for EC type-approval of a motor vehicle or a trailer re the space for rear registration plates)—\n(a) in the heading, and in paragraph 1, for “EC type-approval”, substitute “GB type-approval”;\n(b) in paragraph 3—\n(i) in the first subparagraph, for “Annex VII to Directive 2007/46/EC” substitute “Annex IV to Commission Implementing Regulation (EU) 2020/683”;\n(ii) in the second subparagraph, for “A Member State” substitute “The approval authority”;\n(c) in paragraphs 3 and 4, for “an EC type-approval” substitute “a GB type-approval”.\n(3) In Article 3 (validity and extension of approvals granted under Directive 70/222/EEC)—\n(a) omit “National authorities shall permit”;\n(b) for “661/2009 and” substitute “661/2009 is permitted, and the approval authority must”.\n(4) Omit “This Regulation shall be binding in its entirety and directly applicable in all Member States” following Article 4.\n(5) In Annex I (administrative documents for EC type-approval of motor vehicles and their trailers re the space for rear registration plates)—\n(a) for “EC type-approval”, each time it occurs including in the heading, substitute “GB type-approval”;\n(b) in the explanatory notes at the end of Part 1, in note (c), for “Directive 2007/46/EC Part A of Annex II” substitute “Article 4 of Regulation (EU) 2018/858”;\n(c) in Part 2—\n(i) in the words before section 1, for “as last amended by Regulation (EU) No … / …” substitute “as it has effect in domestic law, as last amended by S.I. …. /……,”;\n(ii) in note (3) to point 0.4 of Section I, for “Directive 2007/46/EC, Annex II, Section A” substitute “Article 4 of Regulation (EU) 2018/858”.\n(6) In Annex II (requirements for the space for mounting and fixing rear registration plates), in point 1.2.3—\n(a) for “point 2.11.5 of Annex I to Directive 2007/46/EC” substitute “point 1.9 of Annex I to Commission Implementing Regulation (EU) 2020/683”;\n(b) for “EC type-approval” substitute “GB type-approval”.",
  "extent": null,
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/ukdsi/2022/9780348239935/regulation/58",
    "retrieved_at": "2026-10-30T14:44:38.730648+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}