# The Road Vehicles and Non-Road Mobile Machinery (Type-Approval) (Amendment and Transitional Provisions) (EU Exit) Regulations 2022, Regulation 83: Commission Regulation (EU) 2017/2400: Annexes


(1) The Annexes to Commission Regulation (EU) 2017/2400 are amended as follows.
(2) In Annex II (requirements and procedures: operation of simulation tool)—
(a) in point 1.1.3, omit the words from “consulting” to “as well as”;
(b) in Appendix 2—
(i) after “Regulation (EU) 2017/2400” insert “both as they have effect in domestic law”;
(ii) in Section II, omit point 2.
(3) In Annex III (input information: characteristics of the vehicle), in the second subparagraph of point 4.1, for “Annex IV and Annex XI to Directive 2007/46/EC” substitute “Annex II to Regulation (EU) 2018/858”.
(4) In Annex V (verifying engine data)—
(a) in appendix 4, in point 7.4, for “EC” substitute “GB”;
(b) in appendix 6—
(i) for point 1.3, substitute—
“1.3. The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.”;
(ii) in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”;
(iii) in point 1.4.1—
(aa) for the image, substitute—
“”
(bb) in the words following the image, omit “in Poland (e20),”;
(iv) in point 1.5.1—
(aa) for the image, substitute—
“”
(bb) in the words following the image, omit “in Poland (e20),”;
(v) in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”;
(vi) in the table following point 2.1, in the column headed “Section 3” for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”.
(5) In Annex VI (verifying transmission, torque convertor and other data)—
(a) in point 3.4.7, for “an approval” substitute “the approval”;
(b) in point 8, for “an approval” substitute “the approval”;
(c) in Appendix 1, in the second paragraph, omit “Regulation (EC) No XXXXX and”;
(d) in Appendices 2, 3, 4 and 5, in point 0.8 in each case, for “EC approval” substitute “GB approval”;
(e) in Appendix 7—
(i) for point 1.3, substitute—
“1.3. The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.”;
(ii) in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”;
(iii) in point 1.5—
(aa) for the image, substitute—
“”
(bb) in the words following the image, omit “in Poland (e20),”;
(iv) in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”;
(v) in the table following point 2.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”.
(6) In Annex VII (verifying axle data)—
(i) in point 5.1, for “Article 12 of Directive 2007/46/EC” substitute “Article 31 of Regulation (EU) 2018/858”;
(b) in Appendix 1—
(i) in the opening section—
(aa) after “2017/2400” the first time it appears, insert “as it has effect in domestic law, as last amended by S.I. …./….”;
(bb) omit the following words “Commission Regulation (EU) 2017/2400 as last amended by …”;
(ii) in Section I, in point 0.5, for “EC” substitute “GB”;
(c) in Appendix 5—
(i) for point 1.3, substitute—
“1.3. The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.”;
(ii) in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”;
(iii) in point 1.4.1—
(aa) for the image, substitute—
“”
(bb) in the words following the image, omit “in Poland (e20),”;
(iv) in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”;
(v) in the table following point 2.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”.
(7) In Annex VIII (verifying air drag data)—
(a) in point 2(12), for the definition ‘EMS’ substitute “‘EMS’ means the European Modular System, denoting a vehicle combination consisting of a vehicle of category N, towing both a semi-trailer and either a trailer or a dolly, whether or not coupled together in that order”;
(b) in Appendix 1—
(i) in the opening section—
(aa) after “2017/2400” the first time it appears, insert “as last amended by S.I. …./….”;
(bb) omit the following words “Commission Regulation (EU) 2017/2400 as last amended by …”;
(ii) in Section I, in point 0.6, for “EC” substitute “GB”;
(c) in Appendix 4—
(i) in tables 11 and 13, in the second row (width), omit “(96/53/EC)”;
(ii) in table 15—
(aa) omit “(96/53/EC)” each time it occurs;
(bb) in the eighth row (front overhang), and the tenth row (corner front/side panel), omit “, 96/53/EC”;
(d) in Appendix 8—
(i) for point 1.3, substitute—
“1.3. The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.”;
(ii) in point 1.4, for “Annex VII to Directive 2007/46/EC” substitute “point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683”;
(iii) in point 1.4.1—
(aa) for the image, substitute—
“”
(bb) in the words following the image, omit “in Poland (e20),”;
(iv) in point 2.1, in the example certification number, at the beginning, for “eX” substitute “g11”;
(v) in the table following point 2.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”.
(8) In Annex X (certification procedure for pneumatic tyres)—
(a) in point 3.3—
(i) in the opening words, for “Article 41 of Directive 2007/46/EC” substitute “Article 68 of Regulation (EU) 2018/858”;
(ii) in point (i), for “an approval” substitute “the approval”;
(iii) in point (ii), for “Directive 2007/46/EC, Article 41” substitute “Article 68(1)(a) of Regulation (EU) 2018/858,”;
(b) in point 3.4.4, for “Article 19(2) of Directive 2007/46/EC” substitute “Article 38 of Regulation (EU) 2018/858”;
(c) in Appendix 1, in the opening words, for “as amended by Commission Regulation (EU) 2019/318” substitute “as last amended by S.I. …. / ….”;
(d) in Appendix 4—
(i) in point 1.1, in the example certification number, at the beginning, for “eX” substitute “g11”;
(ii) in the table following point 1.1, in the column headed “Section 3”, for “Latest amending Regulation (ZZZZ/ZZZZ)” substitute “Latest amending Statutory Instrument (S.I. ZZZZ/ZZZZ)”.
(9) In Annex Xa (conformity of simulation tool operation and of CO2 emissions and fuel consumption related properties etc)—
(a) in paragraph 3(f), after “manufacturer” insert “in Great Britain”;
(b) in the table following paragraph 3(f), for the heading to the second column, substitute
(c) “Verification testing procedure relevant vehicles sold in GB/year”.

---
Source: https://www.legislation.gov.uk/ukdsi/2022/9780348239935/regulation/83 (the official version)
Page: https://openlegislation.uk/draft-road-vehicles-and-non-road-mobile-machinery-type-approval-amendment-and-transitional-provisions-eu-exit-regulations-2022/regulation-83
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.