OpenLegislation

Regulation 6 Power to modify exemptions in light of scientific and technical progress

Original text. Later amendments are not shown.

(1)

The Secretary of State may, by regulations, make provision—

(a)

to establish maximum concentration values up to which the existence of the prohibited substances in specific materials and components of vehicles is to be tolerated;

(b)

to exempt certain materials and components of vehicles from the prohibition in regulation 6 of the End-of-Life Vehicles Regulations 2003f1 if the use of the prohibited substances is unavoidable;

(c)

to delete materials and components of vehicles listed in Annex 2 (exempt materials and components) to the End-of-Life Vehicles Directive, if the use of the prohibited substances is avoidable;

(d)

for the purposes of sub-paragraphs (a) and (b), to—

(i)

designate those materials and components of vehicles that can be stripped before further treatment, and

(ii)

require any such materials and components to be labelled or made identifiable by other appropriate means.

(2)

The provision which may be made under paragraph (1) includes—

(a)

modifying any subordinate legislation which makes provision corresponding to that made by Annex 2 to the End-of-Life Vehicles Directive.

(b)

requiring (whether by modifying subordinate legislation or otherwise) a reference to that Annex (or a reference encompassing that Annex) to be read as a reference to that provision with modifications;

(3)

The Secretary of State may exercise the power in paragraph (1) only to the extent that the Secretary of State considers it is appropriate to do so as a result of scientific and technical progress.

(4)

In this regulation—

  • “prohibited substances” means lead, mercury, cadmium or hexavalent chromium;

  • “treatment” and “vehicle” have the meanings given by regulation 2 of the End-of-Life Vehicles Regulations 2003f2.

Annotations

Footnotes

f1

S.I. 2003/2635. Regulation 6 is amended by S.I. 2010/1094.

f2

The definition of “vehicle” is amended by S.I. 2018/235 and 2020/818.