Paragraph 1

in definition 26, “(4)” is replaced by “(3 4)”;

in definition 45, “(3 4)” is replaced by “(3 4 5)”;

in definition 49, “(4)” is replaced by “(4 7)”;

the text of definition 53 is replaced by the following:

• ““Fibrous or filamentary materials” (0 1 8) include:

  1. (a)

     continuous “monofilaments”;

  2. (b)

     continuous “yarns” and “rovings”;

  3. (c)

     “tapes”, fabrics, random mats and braids;

  4. (d)

     chopped fibres, staple fibres and coherent fibre blankets;

  5. (e)

     whiskers, either monocrystalline or polycrystalline, of any length;

  6. (f)

     aromatic polyamide pulp.”.

in definition 191 (which follows definition 79), “(1)” is inserted before “includes”;

after definition 97 the following is inserted:

“193

“Monofilament” (1) or filament is the smallest increment of fibre, usually several micrometres in diameter.”.

after definition 121 the following is inserted:

“194

“Pressure transducers” (2) are devices that convert pressure measurements into an electrical signal.”.

after definition 140 the following is inserted:

“195

“Roving” (1) is a bundle (typically 12 to 120) of approximately parallel “strands”.

N.B.: “Strand” is a bundle of “monofilaments” (typically over 200) arranged approximately parallel.”.

after definition 171 the following is inserted:

“196

“Tape” (1) is a material constructed of interlaced or unidirectional “monofilaments”, “strands”, “rovings”, “tows”, or “yarns”, etc., usually preimpregnated with resin.

N.B.: “Strand” is a bundle of “monofilaments” (typically over 200) arranged approximately parallel.”.

after definition 178 the following is inserted:

“197

“Tow” (1) is a bundle of “monofilaments”, usually approximately parallel.”.

after definition 185, the following is added:

“198

“Yarn” (1) is a bundle of twisted “strands”.

NB.: “Strand” is a bundle of “monofilaments” (typically over 200) arranged approximately parallel.”.