# The East Anglia ONE Offshore Wind Farm Order 2014, Paragraph 3: Detailed offshore design parameters

Extent: E+W+S

(1) Subject to sub-paragraph (2), no wind turbine generator forming part of the authorised project shall—
(a) exceed a height of 188 metres when measured from LAT to the tip of the vertical blade;
(b) exceed a height of 111 metres to the height of the centreline of the generator shaft forming part of the hub when measured from LAT;
(c) exceed a rotor diameter of 154 metres;
(d) be less than 675 metres from the nearest WTG in either direction perpendicular to the approximate prevailing wind direction (crosswind) or be less than 900 metres from the nearest WTG in either direction which is in line with the approximate prevailing wind direction (downwind);
(e) have a distance of less than 28 metres between the lowest point of the rotating blade of the wind turbine and MHWS;
(f) except with the consent of the Secretary of State, have a gross electrical output capacity of less than 5 MW.
(2) References to the location of a wind turbine generator are references to the centre point of that turbine.

---
Source: https://www.legislation.gov.uk/uksi/2014/1599/schedule/1/part/3/paragraph/3 (the official version)
Page: https://openlegislation.uk/east-anglia-one-offshore-wind-farm-order-2014/schedule-1/part-3/paragraph-3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.