{
  "url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-2/paragraph-17",
  "json_url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-2/paragraph-17.json",
  "legislation": "uksi/2019/539",
  "legislation_title": "The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019",
  "legislation_url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019",
  "path": "schedule/2/paragraph/17",
  "kind": "paragraph",
  "number": "17",
  "heading": "Commission Regulation (EU) No 617/2013",
  "text": "(1) Commission Regulation (EU) No 617/2013 of 26 June 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for computers and computer servers is amended as follows.\n(2) In Article 2 (definitions), at the beginning, for “The following definitions shall apply:”, substitute—\n“The definitions set out in the Ecodesign for Energy-Related Products Regulations 2010 apply; and for any term that is not defined in those Regulations, the definitions set out in Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products, as it had effect immediately before IP completion day, apply. The following definitions also apply—”.\n(3) For Article 6 (conformity assessment), substitute—\n“For the purposes of regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010, the procedure for assessing whether an energy-related product complies with this implementing measure is the internal design control system set out in Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 or the management system for assessing conformity set out in Part 2 of Schedule 1A to those Regulations.”.\n(4) In Article 7 (market surveillance and verification procedure), for “Directive 2009/125/EC”, substitute “ the Ecodesign for Energy-Related Products Regulations 2010 ”.\n(5) Omit Article 9 (revision).\n(6) At the end of Article 10 (entry into force and application), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.\n(7) Annex 3 (measurements by market surveillance authorities and product compliance verification by market surveillance authorities) is amended as follows—\n(a) in each instance, for “Member State” or “Member States”, substitute “ Great Britain ”;\n(b) in section 1 (measurements), in the first paragraph, for the words from “harmonised” to “Union”, substitute “ designated standards ”;\n(c) in section 2 (product compliance verification by market surveillance authorities)—\n(i) for the first paragraph, substitute—\n“When verifying the compliance of a product model with the requirements laid down in this Regulation, for the requirements referred to in this Annex the authorities of Great Britain must apply the following procedure—”;\n(ii) in subparagraph (2)(a)—\n(aa) for “point 2 of Annex IV to Directive 2009/125/EC (declared values)”, substitute “ paragraph 1(2) of Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 ”; and\n(bb) for “paragraph (g) thereof”, substitute “ paragraph 1(2)(b)(vii) of Part 1 of Schedule 1A to those Regulations ”;\n(iii) omit subparagraph (7); and\n(iv) in the third paragraph, for “7” substitute “ 6 ”.\n(8) In Annex 4 (indicative benchmarks), for “purpose of Part 3, point 2 of Annex I to Directive 2009/125/EC” substitute “ purposes of this Regulation ”.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4"
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Words in Sch. 2 para. 17(7)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(b)(xvi)"
    },
    {
      "type": "F",
      "label": "F3",
      "text": "Words in Sch. 2 para. 17(7)(c)(i) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(b)(xvi)"
    },
    {
      "type": "I",
      "label": "I1",
      "text": "Sch. 2 para. 17 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/2019/539/schedule/2/paragraph/17",
    "retrieved_at": "2026-10-28T22:44:55.270455+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}