{
  "url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-2/paragraph-2",
  "json_url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-2/paragraph-2.json",
  "legislation": "uksi/2019/539",
  "legislation_title": "The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019",
  "legislation_url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019",
  "path": "schedule/2/paragraph/2",
  "kind": "paragraph",
  "number": "2",
  "heading": "Commission Regulation (EC) No 107/2009",
  "text": "(1) Commission Regulation (EC) No 107/2009 of 4 February 2009 implementing Directive 2005/32/EC of the European Parliament and of the Council with regard to ecodesign requirements for simple set-top boxes is amended as follows.\n(2) In Article 2 (definitions), at the beginning, for the words from “For the purposes” to “also apply:”, substitute—\n“The definitions set out in the Ecodesign for Energy-Related Products Regulations 2010 apply; and for any term that is not defined in those Regulations, the definitions set out in Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products, as it had effect immediately before IP completion day, apply. The following definitions also apply—”.\n(3) For Article 5 (conformity assessment), substitute—\n“For the purposes of regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010, the procedure for assessing whether an energy-related product complies with this implementing measure is the internal design control system set out in Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 or the management system for assessing conformity set out in Part 2 of Schedule 1A to those Regulations.”.\n(4) Omit Article 8 (revision).\n(5) At the end of Article 9 (entry into force), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.\n(6) Annex 2 (product compliance verification by market surveillance authorities) is amended as follows—\n(a) in each instance, for “Member State” or “Member States”, substitute “ Great Britain ”;\n(b) for the second paragraph, substitute—\n“When verifying the compliance of a product model with the requirements laid down in this Regulation, for the requirements referred to in this Annex the authorities of Great Britain must apply the following procedure—”;\n(c) in subparagraph (2)(a)—\n(i) for “point 2 of Annex IV to Directive 2009/125/EC (declared values)” substitute “ paragraph 1(2) of Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 ”; and\n(ii) for “paragraph (g) thereof”, substitute “ paragraph 1(2)(b)(vii) of Part 1 of Schedule 1A to those Regulations ”;\n(d) subparagraph (7) is omitted;\n(e) in the fourth paragraph—\n(i) for “7” substitute “ 6 ”; and\n(ii) for “harmonised” substitute “ designated ”.\n(7) In Annex 3 (benchmarks), in the first paragraph, for “purpose of Annex I, part 3, point 2, of Directive 2005/32/EC” substitute “ purposes of this Regulation ”.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4"
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Words in Sch. 2 para. 2(6)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(b)(ii)"
    },
    {
      "type": "F",
      "label": "F3",
      "text": "Words in Sch. 2 para. 2(6)(b) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(b)(ii)"
    },
    {
      "type": "I",
      "label": "I1",
      "text": "Sch. 2 para. 2 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/2019/539/schedule/2/paragraph/2",
    "retrieved_at": "2026-10-28T22:44:55.270455+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}