{
  "url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-2/paragraph-23",
  "json_url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-2/paragraph-23.json",
  "legislation": "uksi/2019/539",
  "legislation_title": "The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019",
  "legislation_url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019",
  "path": "schedule/2/paragraph/23",
  "kind": "paragraph",
  "number": "23",
  "heading": "Commission Regulation (EU) No 1253/2014",
  "text": "(1) Commission Regulation (EU) No 1253/2014 of 7 July 2014 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for ventilation units is amended as follows.\n(2) In Article 1, in subparagraph 2(d), after “Council”, insert “ , as it had effect immediately before IP completion day ”.\n(3) In Article 2 (definitions), at the beginning, for “For the purposes of this Regulation the following definitions shall apply:”, substitute—\n“The definitions set out in the Ecodesign for Energy-Related Products Regulations 2010 apply; and for any term that is not defined in those Regulations, the definitions set out in Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products, as it had effect immediately before IP completion day, apply. The following definitions also apply—”.\n(4) In Article 5 (conformity assessment), in paragraph 1, for the words from “Manufacturers of ventilation” to “Annex V to that Directive”, substitute—\n“1 For the purposes of regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010, the procedure for assessing whether an energy-related product complies with this implementing measure is the internal design control system set out in Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 or the management system for assessing conformity set out in Part 2 of Schedule 1A to those Regulations.”.\n(5) For Article 6 (verification procedure for market surveillance purposes) substitute—\n“When performing market surveillance checks to assess compliance with the requirements set out for RVUs in Annex 2 and for NRVUs in Annex 3 the authorities of Great Britain must apply the verification procedure described in Annex 6.”.\n(6) In Article 7 (benchmarks), omit “referred to in point (2) of Part 3 of Annex 1 to Directive 2009/125/EC”.\n(7) Article 8 (review) is omitted.\n(8) At the end of Article 9 (entry into force), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.\n(9) Annex 6 (product compliance verification by market surveillance authorities) is amended as follows—\n(a) in each instance, for “Member State” or “Member States”, substitute “ Great Britain ”;\n(b) for the second paragraph, substitute—\n“When verifying the compliance of a product model with the requirements laid down in this Regulation, for the requirements referred to in this Annex the authorities of Great Britain must apply the following procedure—”;\n(c) in subparagraph (2)(a)—\n(i) for “point 2 of Annex IV to Directive 2009/125/EC (declared values)” substitute “ paragraph 1(2) of Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 ”; and\n(ii) for “paragraph (g) thereof”, substitute “ paragraph 1(2)(b)(vii) of Part 1 of Schedule 1A to those Regulations ”;\n(d) subparagraph (6) is omitted; and\n(e) in the fourth paragraph—\n(i) for “6” substitute “ 5 ”; and\n(ii) for “harmonised” substitute “ designated ”.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4"
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Words in Sch. 2 para. 23(5) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(b)(xxi)"
    },
    {
      "type": "F",
      "label": "F3",
      "text": "Words in Sch. 2 para. 23(9)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(b)(xxi)"
    },
    {
      "type": "F",
      "label": "F4",
      "text": "Words in Sch. 2 para. 23(9)(b) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(b)(xxi)"
    },
    {
      "type": "I",
      "label": "I1",
      "text": "Sch. 2 para. 23 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/2019/539/schedule/2/paragraph/23",
    "retrieved_at": "2026-10-28T22:44:55.270455+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}