{
  "url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-2/paragraph-24",
  "json_url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019/schedule-2/paragraph-24.json",
  "legislation": "uksi/2019/539",
  "legislation_title": "The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2019",
  "legislation_url": "https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-amendment-eu-exit-regulations-2019",
  "path": "schedule/2/paragraph/24",
  "kind": "paragraph",
  "number": "24",
  "heading": "Commission Regulation (EU) No 2015/1095",
  "text": "(1) Commission Regulation (EU) No 2015/1095 of 5 May 2015 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for professional refrigerated storage cabinets, blast cabinets, condensing units and process chillers is amended as follows.\n(2) In Article 2 (definitions), in paragraph 1, for “The following definitions shall apply:”, substitute—\n“The definitions set out in the Ecodesign for Energy-Related Products Regulations 2010 apply; and for any term that is not defined in those Regulations, the definitions set out in Directive 2009/125/EC of the European Parliament and of the Council of 21 October 2009 establishing a framework for the setting of ecodesign requirements for energy-related products, as it had effect immediately before IP completion day, apply. The following definitions also apply—”.\n(3) In Article 4 (conformity assessment)—\n(a) for the first paragraph, substitute—\n“1 For the purposes of regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010, the procedure for assessing whether an energy-related product complies with this implementing measure is the internal design control system set out in Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 or the management system for assessing conformity set out in Part 2 of Schedule 1A to those Regulations.”;\n(b) in the second paragraph, for “Article 8 of Directive 2009/125/EC” substitute “ regulation 4(2)(a) of the Ecodesign for Energy-Related Products Regulations 2010 ”.\n(4) For Article 5 (verification procedure for market surveillance purposes), substitute—\n“When performing market surveillance checks to assess compliance with the requirements set out in Annexes 2, 5 and 7, the authorities of Great Britain must apply the verification procedures described in Annexes 9, 10 and 11.”.\n(5) Omit Article 7 (review).\n(6) At the end of Article 8 (entry into force), omit “This Regulation shall be binding in its entirety and directly applicable in all Member States.”.\n(7) In Annex 2 (ecodesign requirements for professional refrigerated storage cabinets and blast cabinets), in paragraph 2(d)(iii), after “Council”, insert “ , as it had effect immediately before IP completion day ”.\n(8) In Annex 4 (measurements and calculations for professional refrigerated storage cabinets), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.\n(9) In Annex 6 (measurements and calculations for condensing units), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.\n(10) In Annex 8 (measurements and calculations for process chillers), in paragraph 1, for the words from “harmonised” to “Union”, substitute “ designated standards ”.\n(11) Annex 9 (product compliance verification by market surveillance authorities for professional refrigerated storage cabinets) is amended as follows—\n(a) in each instance, for “Member State” or “Member States”, substitute “ Great Britain ”;\n(b) for the second paragraph, substitute—\n“When verifying the compliance of a product model with the requirements laid down in this Regulation, for the requirements referred to in this Annex the authorities of Great Britain must apply the following procedure—”;\n(c) in subparagraph (2)(a)—\n(i) for “point 2 of Annex IV to Directive 2009/125/EC (declared values)” substitute “ paragraph 1(2) of Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 ”; and\n(ii) for “paragraph (g) thereof”, substitute “ paragraph 1(2)(b)(vii) of Part 1 of Schedule 1A to those Regulations ”;\n(d) subparagraph (7) is omitted; and\n(e) in the fourth paragraph—\n(i) for “7” substitute “ 6 ”; and\n(ii) for “harmonised” substitute “ designated ”.\n(12) Annex 10 (product compliance verification by market surveillance authorities for condensing units) is amended as follows—\n(a) in each instance, for “Member State” or “Member States”, substitute “ Great Britain ”;\n(b) for the second paragraph, substitute—\n“When verifying the compliance of a product model with the requirements laid down in this Regulation, for the requirements referred to in this Annex the authorities of Great Britain must apply the following procedure—”;\n(c) in subparagraph (2)(a)—\n(i) for “point 2 of Annex IV to Directive 2009/125/EC (declared values)” substitute “ paragraph 1(2) of Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 ”; and\n(ii) for “paragraph (g) thereof”, substitute “ paragraph 1(2)(b)(vii) of Part 1 of Schedule 1A to those Regulations ”;\n(d) subparagraph (7) is omitted; and\n(e) in the fourth paragraph—\n(i) for “7” substitute “ 6 ”; and\n(ii) for “harmonised” substitute “ designated ”.\n(13) Annex 11 (product compliance verification by market surveillance authorities for process chillers) is amended as follows—\n(a) in each instance, for “Member State” or “Member States”, substitute “ Great Britain ”;\n(b) for the second paragraph, substitute—\n“When verifying the compliance of a product model with the requirements laid down in this Regulation, for the requirements referred to in this Annex the authorities of Great Britain must apply the following procedure—”;\n(c) in subparagraph (2)(a)—\n(i) for “point 2 of Annex IV to Directive 2009/125/EC (declared values)” substitute “ paragraph 1(2) of Part 1 of Schedule 1A to the Ecodesign for Energy-Related Products Regulations 2010 ”; and\n(ii) for “paragraph (g) thereof”, substitute “ paragraph 1(2)(b)(vii) of Part 1 of Schedule 1A to those Regulations ”;\n(d) subparagraph (7) is omitted; and\n(e) in the fourth paragraph—\n(i) for “7” substitute “ 6 ”; and\n(ii) for “harmonised” substitute “ designated ”.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Words in Regulations substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 4"
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Words in Sch. 2 para. 24(4) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(b)(xxii)"
    },
    {
      "type": "F",
      "label": "F3",
      "text": "Words in Sch. 2 para. 24(11)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(b)(xxii)"
    },
    {
      "type": "F",
      "label": "F4",
      "text": "Words in Sch. 2 para. 24(11)(b) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(b)(xxii)"
    },
    {
      "type": "F",
      "label": "F5",
      "text": "Words in Sch. 2 para. 24(12)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(b)(xxii)"
    },
    {
      "type": "F",
      "label": "F6",
      "text": "Words in Sch. 2 para. 24(12)(b) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(b)(xxii)"
    },
    {
      "type": "F",
      "label": "F7",
      "text": "Words in Sch. 2 para. 24(13)(a) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(1)(2)(b)(xxii)"
    },
    {
      "type": "F",
      "label": "F8",
      "text": "Words in Sch. 2 para. 24(13)(b) substituted (31.12.2020 immediately before IP completion day) by The Ecodesign for Energy-Related Products and Energy Information (Amendment) (EU Exit) Regulations 2020 (S.I. 2020/1528), regs. 1(2), 6(3)(4)(b)(xxii)"
    },
    {
      "type": "I",
      "label": "I1",
      "text": "Sch. 2 para. 24 in force at 31.12.2020 on IP completion day (in accordance with 2020 c. 1, Sch. 5 para. 1(1)), see reg. 1(3)"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/uksi/2019/539/schedule/2/paragraph/24",
    "retrieved_at": "2026-10-28T22:44:55.270455+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}