# The Ecodesign for Energy-Related Products and Energy Information (Household Tumble Dryers) Regulations 2026, Paragraph 9: Label for non-condenser tumble dryers with repairability class pictogram

Extent: E+W+S

The following information must be included in the label—
(a) Point I: QR code;
(b) Point II: trademark;
(c) Point III: model identifier;
(d) Point IV: scale of energy efficiency classes from A to G;
(e) Point V: the energy efficiency class determined in accordance with Schedule 12;
(f) Point VI: weighted average energy consumption per 100 drying cycles in kWh, rounded to the nearest integer; in the case of a gas-fired household tumble dryer, the weighted average energy consumption (gas and electricity) per 100 drying cycles in kWh, rounded to the nearest integer;
(g) Point VII: repairability class determined in accordance with Schedule 12;
(h) Point VIII: acoustic airborne noise emission class determined in accordance with Schedule 12, of the drying cycle of the eco programme, with relevant pictogram and value in dB(A);
(i) Point IX: rated capacity, in kg, for the eco programme at full load;
(j) Point X: duration of the eco programme at full load in hours and minutes (h:min) rounded to the nearest minute;
(k) Point XI: the number of these Regulations which is ‘2026 No. 318’.

---
Source: https://www.legislation.gov.uk/uksi/2026/318/schedule/7/paragraph/9 (the official version)
Page: https://openlegislation.uk/ecodesign-for-energy-related-products-and-energy-information-household-tumble-dryers-regulations-2026/schedule-7/paragraph-9
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

