# The Ecodesign for Energy-Related Products Regulations 2010, Paragraph 6: Operational matters in relation to approved bodies


(1) Subject to the terms of its approval and to sub-paragraph (3), an approved body must carry out the conformity assessment activities and procedures—
(a) in respect of which the body's approval was given under paragraph 2; or
(b) in respect of which the body's approval as an approved body was made.
(2) Where an approved body carries out a conformity assessment procedure, it must do so in accordance with Part 3.
(3) An approved body must make provision for a manufacturer to be able to make an appeal against a refusal by the approved body—
(a) to issue a type-examination certificate referred to in Annexes 3 and 4 to Council Directive 92/42/EEC of 21 May 1992 on efficiency requirements for new hot-water boilers fired with liquid or gaseous fuels (the “1992 Directive”), read as if modified by Article 4(4) and (5) of Commission Regulation (EU) No 813/2013 of 2 August 2013 implementing Directive 2009/125/EC of the European Parliament and of the Council with regard to ecodesign requirements for space heaters and combination heaters (the “2013 Regulation”); or
(b) to affix, or cause to be affixed, the approved body's identification number pursuant to paragraph 1 of the Module D: Production quality assurance section or paragraph 1 of the Module E: Product quality assurance section of Annex 4 to the 1992 Directive read as if modified by Article 4(5) of the 2013 Regulation.

---
Source: https://www.legislation.gov.uk/uksi/2010/2617/schedule/1B/paragraph/6 (the official version)
Page: https://openlegislation.uk/ecodesign-for-energy-related-products-regulations-2010/schedule-1B/paragraph-6
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.