# The Electrically, Hydraulically and Oil-Electrically Operated Lifts (Components) (EEC Requirements) Regulations 1991, Regulation 8: Suspension and withdrawal of EEC type-examination certificate


(1) If an approved body, after checking a component or after receipt of a report from another approved body or an approved other body made at the request of the approved body, is satisfied that a component of the same type as that in respect of which it has issued or extended an EEC type-examination certificate under these Regulations and which certificate remains in force has not been manufactured to conform with the EEC type-examination requirements in respect of such component, the approved body shall give notice to the holder of such certificate.
(2) If it appears to an approved body which has issued or extended an EEC type-examination certificate and which certificate remains in force that any condition subject to which it was issued or extended has not been fulfilled, the approved body may give notice to the holder of such certificate.
(3) Any notice given under paragraph (1) or (2) of this regulation shall specify–
(a) the respects in which the component does not so conform or the condition appears not to have been fulfilled; and
(b) that, unless the approved body is satisfied by the holder of the certificate within a specified period that components of the same type manufactured by the same manufacturer do so conform or that the condition is fulfilled, the certificate will be suspended or withdrawn; or
(c) if the approved body thinks fit, that the certificate is suspended with immediate effect.
(4) If, after the period specified under paragraph (3)(b) of this regulation, the approved body decides to suspend or withdraw an EEC type-examination certificate the approved body shall immediately give notice of the decision to the holder of the certificate and shall specify that the suspension or withdrawal is of immediate effect or the date on which the suspension or withdrawal is to take effect.
(5) A notice given under this regulation in respect of a decision to suspend or withdraw an EEC type-examination certificate shall specify the grounds for the decision, the conditions for revoking any suspension and shall inform the holder of the certificate of his right to apply for a review of the decision under regulation 9.
(6) If the approved body decides to suspend or withdraw an EEC type-examination certificate under this regulation it shall immediately give notice of the decision to the Secretary of State.
(7) The suspension or withdrawal of an EEC type-examination certificate shall not affect the validity of any certificate of conformity or EEC mark of conformity issued or placed on a component under regulation 5 prior to that suspension or withdrawal.

---
Source: https://www.legislation.gov.uk/uksi/1991/2748/regulation/8 (the official version)
Page: https://openlegislation.uk/electrically-hydraulically-and-oil-electrically-operated-lifts-components-eec-requirements-regulations-1991/regulation-8
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.