Paragraph 1 Label design
The label shall be in accordance with Figure 1 and shall include the information required by the notes.
Figure 1
Notes to Figure 1:
| I. | Manufacturer’s name or trade mark. |
| II. | Manufacturer’s model identifier. |
| III. | The energy efficiency class of an appliance shall be determined in accordance with Schedule 5 (energy efficiency class). The appropriate letter shall be placed at the same level as the relevant arrow. |
| IV. | Without prejudice to any requirements under the Community Eco-label scheme, where an appliance has been granted a “Community Eco-label” pursuant to Council Regulation (EEC) No 880/92f1 a copy of the Eco-label mark (the flower) may be added here. The “refrigerator/freezer label design guide” referred to below explains how the Eco-label mark may be included in the label. |
| V. | Energy consumption in accordance with the harmonised standards but expressed in kWh per year (i.e. per 24 hours × 365). |
| VI. | Sum of net storage volume of all compartments which do not merit a star rating (i.e. operating temperature > −6°C). |
| VII. | Sum of net storage volume of all frozen food storage compartments which merit a star rating (i.e. operating temperature ≤ −6°C). |
| VIII. | Star rating of frozen food storage compartment, in accordance with the harmonised standards. Where this compartment does not merit any stars, this position shall be left blank. |
| IX. | Where applicable, noise measured in accordance with Directive 86/594/EECf2. |