OpenLegislation

Schedule THE SCHEDULE TO THE SCHEME PLANS AND SPECIFICATIONS OF THE BLACKWATER CANAL BRIDGE

Original text. Later amendments are not shown.

The Blackwater Canal Bridge is to be located at the site of an old brick arch bridge over the Chelmer and Blackwater Navigation 500 metres north-west of the crossing of the River Chelmer at Fullbridge (A414).

The substructure is to be constructed in concrete and clad in brickwork while the deck is to be constructed in steel and concrete and surmounted with an aluminium parapet as shown on drawing Nos B941/SI1 and B941/SI2.

The bridge is to be 14.3 metres wide overall carrying a single 7.3 metres wide carriageway and two hardened verges. There is to be one single span of 22.5 metres across the Chelmer and Blackwater Navigation. The headway is to be 2.2 metres above normal water level which is more than the 2.134 metres required by the Chelmer and Blackwater Navigation Ltd. The width of the canal will be increased from 10 metres to 13 metres.