# Commission Decision of 24 October 1995 implementing Article 20 (2) of Council Directive 89/106/EEC on construction products (Text with EEA relevance) (95/467/EC), Division: Systems of attestation of conformity

Extent: E+W+S+N.I.

For the product(s) and intended use(s) listed below, CEN/Cenelec are requested to specify the following system(s) of attestation of conformity in the relevant harmonized standard(s):
For reaction to fire, see Commission Decision 2000/147/EC ( OJ L 50, 23.2.2000, p. 14 ).
Products/materials for which a clearly identifiable stage in the production process results in any improvement of the reaction to fire classification (e.g. an addition of fire retardants or a limiting of organic material).
Products/materials not covered by footnote ( 2 ).
System 1: See CPD Annex III.2.(i), without audit-testing of samples.
System 3: See CPD Annex III.2.(ii), Second possibility.
System 4: See CPD Annex III.2.(ii), third possibility.
Products/materials that do not require to be tested for reaction to fire (e.g. Products/materials of Classes A1 according to Commission Decision 96/603/EC).
Product(s)
Intended use(s)
Level(s) or class(es)(Reaction to fire of incorporated materials)
Attestation of conformity system(s)
Plasterboards and ceiling elements with thin laminations, fibrous gypsum boards,fibrous gypsum plaster casts and composite panels (laminates) in which the incorporated material is placed on a face susceptible to be exposed to fire, including relevant ancillary products
In walls, partitions or ceilings (or lining thereof) subject to reaction to fire requirements
A1 , A2 , B , C
A1 , A2 , B , C , D, E
(A1 to E) , F
1
3
4
The specification for the system should be such that it can be implemented even where performance does not need to be determined for a certain characteristic, because at least one Member State has no legal requirement at all for such characteristic (see Article 2 (1) of the CPD and, where applicable, clause 1.2.3 of the Interpretative Documents). In those cases the verification of such a characteristic must not be imposed on the manufacturer if he does not wish to declare the performance of the product in that respect.

---
Source: https://www.legislation.gov.uk/eudn/1995/467/annex/3/division/2/division/1 (the official version)
Page: https://openlegislation.uk/eu-decision-1995-467/annex-3/division-2/division-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.