# Council Decision of 3 December 1998 on common standards relating to filling in the uniform format for residence permits (98/701/JHA)

EU Decision 1998/701 · adopted 3 December 1998

Council Decision of 3 December 1998 on common standards relating to filling in the uniform format for residence permits (98/701/JHA)

## Introductory text

Council Decision
of 3 December 1998
on common standards relating to filling in the uniform format for residence permits
(98/701/JHA)
THE COUNCIL OF THE EUROPEAN UNION,
Having regard to Joint Action 97/11/JHA of 16 December 1996 concerning a uniform format for residence permits, and in particular Article 2(1) thereof,
Whereas it is necessary to establish common standards relating to filling in the said format, so as to ensure the uniform aspect thereof;
Whereas this Decision does not affect the competence of Member States relating to the recognition of States and territorial entities, as well as of passports and travel documents issued by these States or entities; whereas the attribution of the codes in the Appendix to this Decision is of a purely administrative nature and is without prejudice to the determination of the nationality of third country residents,
HAS DECIDED AS FOLLOWS:

## 1 

The uniform format for residence permits shall be filled in in accordance with the procedures contained in the Annex hereto.

## 2 

The Council shall examine, at least once a year, the procedures and codes contained in the Annex and the Appendix hereto with a view to adapting them.

## 3 

This Decision shall enter into force on the day following its publication in the Official Journal of the European Communities.

## Signature

Done at Brussels, 3 December 1998.
For the Council
The President
K. Schlögl

## I PROCEDURES FOR COMPLETION OF THE COMMON REFERENCE AREA OF THE STICKER IN THE UNIFORM FORMAT OF THE RESIDENCE PERMIT.

The format adopted for the sticker is in ID2 format (conforming with the dimensions for the ID2 type card (ISO7810)).
There are eight spaces to be completed in accordance with the technical specifications, where appropriate, as follows:

## 1 Permit No

The number of the document shall appear in this space (protected by special security features and preceded by a letter code), in accordance with part one paragraph 3.7 (initial letters) as detailed in paragraph 3.2) of the technical specifications.

## 2 Name

The surname(s) and first name(s) shall be inserted here in order. The surname(s) and first name(s) on the document to which the sticker is attached must be exactly the same as those on the sticker.

## 3 ‘Valid until’ space

The relevant date of expiry shall be entered in this space or, if necessary, a word or a code indicating unlimited validity.
Member States shall forward to the General Secretariat of the Council the various words or codes referred to in the previous subparagraph, to enable the Secretariat to draw up a list for distribution to all Member States. Such a list could also be used as an additional device for discovering falsifications.
Where an expiry date is entered, the date must be entered by means of three groups of two figures in the following order, two for the day, two for the month and two for the year, to be separated by a hyphen, and the first figure shall be a nought where the number is lower than 10 (e.g. 15-01-96: 15 January 1996).

## 4 Place/date of issue

This space shall indicate the place and date of issue of the residence permit.
The date of issue shall be entered by means of three groups of two figures in the order laid down in the third subparagraph of point 3.

## 5 Type of permit

This space shall show the specific type of the residence permit issued by the Member State to the national of a third country.
This space should not be harmonised because of disparities between the laws of the Member States. However, Member States will forward to the General Secretariat of the Council the various references they include in this space to enable the Secretariat to draw up a list for distribution to all Member States. Such a list could also be used as an additional device for discovering falsifications.

## 6 Remarks

Member States may enter in this space information and remarks for national use which are required by national provisions concerning nationals from third countries, including information on authorisation to work and passport number.
Member States will forward to the General Secretariat of the Council the various permanent references they include in this space to enable the Secretariat to draw up a list for distribution to all Member States. Such a list could also be used as an additional device for discovering falsifications.

## 7 Date/signature/authorisation

Where necessary, the issuing authority may affix here its signature and its stamp and/or require the holder to affix his signature.
If this space is used, the date should be entered by means of three groups of two figures in the order laid down in the third subparagraph of point 3.
Where the Member State's legislation or practices require the affixing of an issuing-office stamp, the stamp should be located in the rectangle bounded on the right by the right edge of the sticker, on the left by the ‘Remarks’ box, above by the emblem of the Member State and below by the machine-readable area.
It is also desirable that the stamp consist of a rectangle 1 cm high × 2,5 cm wide showing the name of the authority issuing the residence permit and the signature and/or the date. The signature and/or the date should be framed on each side by three parallel horizontal lines, the middle one being half as long as the other two.

## 8 Machine-readable area

The area reserved for machine reading (including codes indicating nationality or other status) shall be completed in accordance with the standards of the International Civil Aviation Organisation (ICAO), as set out in the technical specification. On the second line, either the number of the permit or the passport number shall be recorded. The three codes relating to the nationality or status of the permit holder shall be entered in accordance with the list in the Appendix.
Member States shall notify the General Secretariat of the Council whether they intend to record the permit or the passport number. The Secretariat will circulate this information to all Member States.

## II PROCEDURES FOR COMPLETION OF THE COMMON REFERENCE AREA OF THE STAND-ALONE DOCUMENT IN THE UNIFORM FORMAT OF THE RESIDENCE PERMIT.

The format adopted for the stand-alone document is either the ID1 or ID2 format in accordance with ISO standard 7810.1995. In both formats there are 12 boxes to be completed in accordance with the technical specifications where appropriate.

### Division A: FRONT

## 1 Permit No

The number of the document shall appear in this space preceded by a letter code, in accordance with Part 2 of paragraph 3.2 (initial letter(s) as detailed in Part I, paragraph 3.2) of the technical specifications.

## 2 Name

The surname(s) and first name(s) shall be inserted here in order.

## 3 ‘Valid until’ space

The corresponding date of expiry shall be entered in this space or, if necessary, a word or a code indicating unlimited validity.
Member States shall forward to the General Secretariat of the Council the various words or codes referred to in the previous subparagraph, to enable the Secretariat to draw up a list for distribution to all Member States. Such a list could also be used as an additional device for discovering falsifications.
Where an expiry date is entered, the date must be entered by means of three groups of two figures in the following order, two for the day, two for the month and two for the year, to be separated by a hyphen, and the first figure shall be a nought where the number is lower than 10 (e.g. 15-01-96: 15 January 1996).

## 4 Place/date of issue

This space shall indicate the place and date of issue of the residence permit.
The date of issue shall be entered by means of three groups of two figures in the order laid down in the third subparagraph of point 3.

## 5 Type of permit

This space shall show the specific type of the residence permit issued by the Member State to the national of a third country.
This space should not be harmonised because of disparities between the laws of the Member States. However, Member States will forward to the General Secretariat of the Council the various references they include in this space to enable the Secretariat to draw up a list for distribution to all Member States. Such a list could also be used as an additional device for discovering falsifications.

## 6 Remarks

Member States may enter in this space information and remarks for national use which are required by national provisions concerning nationals from third countries, incuding information on authorisation to work.
Member States will forward to the General Secretariat of the Council the various permanent references they include in this space to enable the Secretariat to draw up a list for distribution to all Member States. Such a list could also be used as an additional device for discovering falsifications.

## 7 Date/signature/authorisation

Where necessary, the issuing authority may affix here its signature and its stamp and/or require the holder to affix his signature.
If this space is used, the date should be entered by means of three groups of two figures in the order laid down in the third subparagraph of point 3.
Where the Member State's legislation or practices require the affixing of an issuing-office stamp, the stamp could be located in the rectangle bounded on the right by the right edge of the standalone document, on the left by the ‘Remarks’ box, above by the emblem of the Member State and below by the base of the card in the ID1 format, or by the machine-readable area in the ID2 format.
It is also desirable that the stamp consist of a rectangle 1 cm high x 2,5 cm wide showing the name of the authority issuing the residence permit and the signature and/or the date; the signature and/or the date should be framed on each side by three parallel horizontal lines, the middle one being half as long as the other two.

## B BACK

Where there is a stand-alone document, the following additional references shall appear on the back.

## 8 Date and place of birth

Reference to the place and date of birth of the holder of the residence permit shall be entered here.
The place of birth shall be the name of the city, if known, as well as the country where the holder of the permit was born. Reference to the country of birth must be given since the holder's nationality may be different from the country of his birth.
The date of birth shall be entered by means of three groups of two figures in the order laid down in the third subparagraph of point 3.

## 9 Nationality

The nationality or any other status of the holder of the residence permit shall be entered here.
Reference to the nationality shall be by reference to the name of the country of which the foreigner is a national, or to any other relevant status, e.g. Colombia.

## 10 Sex

The sex of the holder of the residence permit shall be entered here in accordance with ICAO standards for the machine-readable zone.
Member States will forward to the General Secretariat of the Council the various references they include in this box to enable the Secretariat to draw up a list for distribution to all Member States. Such a list could also be used as an additional device for discovering falsifications.

## 11 Remarks

Member States may enter in this box information and remarks for national use which are required by national provisions concerning nationals from third countries, for example the holder's address.
Member States will forward to the General Secretariat of the Council the various references they include in this box to enable the Secretariat to draw up a list for distribution to all Member States. Such a list could also be used as an additional device for discovering falsifications.

## 12 Machine-readable area

(on reverse side of the document in ID1 format and on the front of the document in ID2 format)
The area reserved for machine reading (including codes indicating nationality or other status) shall be completed in accordance with the standards of the International Civil Aviation Organisation (ICAO), as set out in the technical specification. The three codes relating to the nationality or status of the permit holder shall be entered in accordance with the list in the Appendix.

## List of the codes for entering the nationality or status of the holder of the residence permit in the machine-readable area

For residents of Hong Kong, the code HKG may be used.
Country
Code
EUROPE
Albania
ALB
Andorra
AND
Armenia
ARM
Azerbaijan
AZE
Belarus
BLR
Bosnia and Herzegovina
BIH
Bulgaria
BGR
Croatia
HRV
Cyprus
CYP
Czech Republic
CZE
Estonia
EST
Georgia
GEO
Holy See (Vatican City State)
VAT
Hungary
HUN
Latvia
LVA
Lithuania
LTU
Malta
MLT
Moldova, Republic of
MDA
Monaco
MCO
Poland
POL
Romania
ROM
Russian Federation
RUS
San Marino
SMR
Slovakia
SVK
Slovenia
SVN
Switzerland
CHE
The former Yugoslav Republic of Macedonia
FRM
Turkey
TUR
Ukraine
UKR
Yugoslavia, Federal Republic of
YUG
AFRICA
Algeria
DZA
Angola
AGO
Benin
BEN
Botswana
BWA
Burkina Faso
BFA
Burundi
BDI
Cameroon
CMR
Cape Verde
CPV
Central African Republic
CAF
Chad
TCD
Comoros
COM
Congo
COG
Congo, the Democratic Republic of the
COD
Cote d'Ivoire
CIV
Djibouti
DJI
Egypt
EGY
Equatorial Guinea
GNQ
Eritrea
ERI
Ethiopia
ETH
Gabon
GAB
Gambia
GMB
Ghana
GHA
Guinea
GIN
Guinea-Bissau
GNB
Kenya
KEN
Lesotho
LSO
Liberia
LBR
Libyan Arab Jamahiriya
LBY
Madagascar
MDG
Malawi
MWI
Mali
MLI
Mauritania
MRT
Mauritius
MUS
Morocco
MAR
Mozambique
MOZ
Namibia
NAM
Niger
NER
Nigeria
NGA
Rwanda
RWA
Sao Tome and Principe
STP
Senegal
SEN
Seychelles
SYC
Sierra Leone
SLE
Somalia
SOM
South Africa
ZAF
Sudan
SDN
Swaziland
SWZ
Tanzania, United Republic of
TZA
Togo
TGO
Tunisia
TUN
Uganda
UGA
Zambia
ZMB
Zimbabwe
ZWE
AMERICA
Antigua and Barbuda
ATG
Argentina
ARG
Bahamas
BHS
Barbados
BRB
Belize
BLZ
Bolivia
BOL
Brazil
BRA
Canada
CAN
Chile
CHL
Colombia
COL
Costa Rica
CRI
Cuba
CUB
Dominica
DMA
Dominican Republic
DOM
Ecuador
ECU
El Salvador
SLV
Grenada
GRD
Guatemala
GTM
Guyana
GUY
Haiti
HTI
Honduras
HND
Jamaica
JAM
Mexico
MEX
Nicaragua
NIC
Panama
PAN
Paraguay
PRY
Peru
PER
Saint Kitts and Nevis
KNA
Saint Lucia
LCA
Saint Vincent and the Grenadines
VCT
Suriname
SUR
Trinidad and Tobago
TTO
United States of America
USA
Uruguay
URY
Venezuela
VEN
ASIA
Afghanistan
AFG
Bahrain
BHR
Bangladesh
BGD
Bhutan
BTN
Brunei Darussalam
BRN
Cambodia
KHM
China
CHN
East Timor
TMP
India
IND
Indonesia
IDN
Iran (Islamic Republic of)
IRN
Iraq
IRQ
Israel
ISR
Japan
JPN
Jordan
JOR
Kazakhstan
KAZ
Korea, Democratic People's Republic of
PRK
Korea, Republic of
KOR
Kuwait
KWT
Kyrgyzstan
KGZ
Lao People's Democratic Republic
LAO
Lebanon
LBN
Malaysia
MYS
Maldives
MDV
Mongolia
MNG
Myanmar
MMR
Nepal
NPL
Oman
OMN
Pakistan
PAK
Palestine
*
Philippines
PHA
Qatar
QAT
Saudi Arabia
SAU
Singapore
SGP
Sri Lanka
LKA
Syrian Arab Republic
SYR
Tajikistan
TJK
Thailand
THA
Turkmenistan
TKM
United Arab Emirates
ARE
Uzbekistan
UZB
Vietnam
VNM
Yemen
YEM
OCEANIA
Australia
AUS
Fiji
FJI
Kiribati
KIR
Marshall Islands
MHL
Micronesia (Federated States of)
FSM
Nauru
NRU
New Zealand
NZL
Palau
PLW
Papua New Guinea
PNG
Samoa
WSM
Solomon Islands
SLB
Tonga
TON
Tuvalu
TUV
Vanuatu
VUT
The following codes are also used:
Stateless
XXA
Refugees (Convention of 28 July 1951)
XXB
Other refugees
XXC
International Committee of the Red Cross
CRC
UNHCR
UNR

---
Source: https://www.legislation.gov.uk/eudn/1998/701 (the official version)
Page: https://openlegislation.uk/eu-decision-1998-701
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.