OpenLegislation

Division 7 SPECIFICATIONSF1

Original text. Later amendments are not shown.

  1. 7.1Division 7.1
  2. 7.1.1Division 7.1.1
  3. 7.1.1.1The section width shall be calculated by the following formula:
  4. 7.1.2Division 7.1.2
  5. 7.1.2.1The theoretical outer diameter of a retreaded tyre shall be calculated by the following formula:
  6. 7.1.2.2Division 7.1.2.2
  7. 7.1.3Division 7.1.3
  8. 7.1.3.1Division 7.1.3.1
  9. 7.1.4Division 7.1.4
  10. 7.1.4.1Division 7.1.4.1
  11. 7.1.4.2Division 7.1.4.2
  12. 7.1.4.2.1Division 7.1.4.2.1
  13. 7.1.4.2.2Division 7.1.4.2.2
  14. 7.1.4.2.3Division 7.1.4.2.3
  15. 7.1.5Division 7.1.5
  16. 7.1.5.1The actual outer diameter of a retreaded tyre must not be outside the values of Dmin and Dmax obtained by the following formulae:
  17. 7.1.5.1.1Division 7.1.5.1.1
  18. 7.1.5.1.2For sizes mentioned in paragraph 7.1.2.2 above:
  19. 7.1.5.1.3Division 7.1.5.1.3
  20. 7.1.5.1.4The coefficient ‘b’ is:
  21. 7.1.5.2Division 7.1.5.2

Annotations

Textual amendments

F1

Substituted by Council Decision of 13 March 2006 amending Decisions 2001/507/EC and 2001/509/EC with a view to making United Nations Economic Commission for Europe (UN/ECE) Regulation Nos 109 and 108 on retreaded tyres compulsory (2006/443/EC).