# Commission Decision of 23 December 2003 on the technical prescriptions for the implementation of Article 3 of Directive 2003/102/EC of the European Parliament and of the Council relating to the protection of pedestrians and other vulnerable road users before and in the event of a collision with a motor vehicle and amending Directive 70/156/EEC (notified under document number C(2003) 5041) (Text with EEA relevance) (2004/90/EC), Division 3.4.1.1

Extent: E+W+S+N.I.

The lower legform impactor shall consist of two foam covered rigid segments, representing femur (upper leg) and tibia (lower leg), joined by a deformable, simulated knee joint. The overall length of the impactor shall be 926 ± 5 mm, having a required test mass of 13,4 ± 0,2 kg and comply with Section 4 of this Chapter and Figure 1 of this Part. Brackets, pulleys, etc. attached to the impactor for the purpose of launching it, may extend the dimensions shown in Figure 1.

---
Source: https://www.legislation.gov.uk/eudn/2004/90/annex/chapter/II/division/3/division/3.4/division/3.4.1/division/3.4.1.1 (the official version)
Page: https://openlegislation.uk/eu-decision-2004-90/annex/chapter-II/division-3/division-3.4/division-3.4.1/division-3.4.1.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.